Abstract:As a classic bridge type, cable-stayed bridge is widely used because of its superior spanning capacity. Based on the mechanical characteristics of stay cable supporting deck, we propose a novel mechanical model aiming to evaluate the vertical bending stiffness of a floating cable-stayed bridge, namely, multi-beam model with discrete springs. First, a single-tower cable-stayed bridge is modeled as a triple-beam model with discrete springs in order to introduce the novel method easily. In this model, the stay cables are simplified as springs without mass and the single tower is regarded as an Euler–Bernoulli beam with consideration of the effect of axial force. At the same time, the bridge deck has been cut into two Euler–Bernoulli beams at the intersection of a deck and a tower. Then equations governing vibrations of the beam and tower are derived according to Hamilton’s principle for dynamic problems in elastic body under equilibrium state. The program is established by transfer matrix method to solve the eigenvalues of the system along with its boundary and matching conditions. Thus, the vertical bending stiffness of the floating cable-stayed bridge can be evaluated based on the frequency. In addition, the influences of the cables’ material, location, stiffness and number on vertical bending stiffness are analyzed in detail when the steel cables are replaced with CFRP cables. Lastly, the same method is directly extended to modeling the floating multi-tower cable-stayed bridge. The results, which are validated by commercial finite element software, demonstrate that the proposed mechanical model and method are both valuable and significant not only in theoretical research and calculation but also in design of engineering.

Parametric Oscillation Of Cables In Cable-Stayed Bridges Under Deck-Motion Excitations

EFFECTS OF LOCAL CABLE VIBRATION ON THE SEISMIC RESPONSE OF CABLE-STAYED BRIDGES

Static Instability Analysis Of Long-Span Cable-Stayed Bridges With Carbon Fiber Composite Cable Under Wind Load

Damping Parameter Identification Of Large Span Cable-Stayed Bridges

INVESTIGATION OF DAMPING MATRICES ACCURATE ESTIMATION OF CABLE-STAYED BRIDGES BASED ON NON-PROPORTIONAL DAMPING

Dynamic Responses of Cable-Stayed Bridges to Vehicular Loading Including the Effects of the Local Vibration of Cables

Nonlinear Dynamic Response of Stay Cables under Axial Harmonic Excitation

Dynamic characteristics and seismic response analysis of cable-stayed bridges taking into account cable lateral vibration

Parametrically excited oscillation of stay cable and its control in cable-stayed bridges

Nonlinear vibration of stay cables under fluctuating wind load and support excitation

NONLINEAR VIBRATION OF STEEL AND CFRP CABLES OF LONG SPAN CABLE-STAYED BRIDGE UNDER VEHICULAR LOADS

PARAMETRICALLY EXCITED INSTABILITY OF A CABLE UNDER TWO SUPPORT MOTIONS

Nonlinear Coupled Vibration Behavior of BFRP Cables on Long-Span Cable-Stayed Bridges under Parametric Excitation

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Parametric vibration of carbon fiber reinforced plastic cables with damping effects in long-span cable-stayed bridges

Parametrically Excited Instability Analysis of a Semi-Actively Controlled Cable

Fast Operational Modal Analysis of a Single-Tower Cable-Stayed Bridge by a Bayesian Method

Modeling, dynamics, and parametric studies of a multi-cable-stayed beam model

Experimental Study on Stability of Long-Span PC Cable-Stayed Bridge during the Construction Periods

Modeling and Parametric Analysis of In-Plane Free Vibration of a Floating Cable-Stayed Bridge with Transfer Matrix Method

Role of cable dynamics in transverse seismic response of sea-crossing cable-stayed bridges