Abstract:The clay shock method is used to fill the excavation gap caused by shield taper and deviation during shield tunnelling. The rheological properties and diffusion-related performance of clay shock (CS) slurry have an important influence on its ability. In this study, the authors tested the rheological properties of CS slurry by using a rotational viscometer with a stepless regulation in speed. The influence of the parameters of preparation of CS slurry on its rheological properties was analyzed. The results showed that the Bingham plastic model is more suitable for characterizing the shear thinning behaviors of CS slurry. The apparent viscosity and yield stress of the CS slurry first increased and then decreased with increasing duration and speed of stirring. They increased with the duration of standing and decreased with increasing the water–powder ratio of component A. The numerical diffusion simulations and model tests with constant pressure were carried out to investigate the influence of the water–powder ratio of component A, the permeability of the stratum, and the net injection pressure on its diffusion-related performance. The process of diffusion of CS slurry mainly involved filling and permeability diffusion. The filling diffusion stage mainly occurred in the first 30 s of injection and can reach 70–80 % of the final injection mass. The effect degree of the aforementioned factors on the diffusion distance of CS slurry was in the following order: permeability coefficient of stratum > water-powder ratio of component A > net injection pressure. CS slurry diffused over a distance of less than 10 cm in sandy soil, where this was negatively correlated with the viscosity of the slurry and positively correlated with the coefficient of permeability and porosity of the stratum. The filling time of the excavation gap was positively correlated with the viscosity of the slurry, negatively correlated with the net injection pressure, and was not significantly correlated with the coefficient of permeability of the stratum. The diffusion termination time was negatively correlated with the viscosity of the slurry, and positively correlated with the coefficient of permeability of the stratum and the net injection pressure.

Dispersant for Reducing Mud Cakes of Slurry Shield Tunnel Boring Machine in Sticky Ground

Slurry Shield Tunnelling in Clayey Soils: Typical Problems and Countermeasures

CASE STUDY OF RELIEVING A SLURRY SHIELD?S CUTTER HEAD FROM BEING TRAPPED IN SILTY SAND LAYERS

Study on the Characteristics and Mechanism of Shield Tunnel Mud Cake Disintegration in Complex Red-Bed Geology

Case study of slurry shield driving parameters' influences on ground surface settlements

Case Study of Ground Surface Consolidation Settlements Induced by Slurry Shield Tunnelling

Analysis and control of ground settlement of embankments in construction of cross-river shield tunnels

Influence of Dispersants on Coal-Water Slurry Prepared from the Solid Residue of Plasma Pyrolysis of Coal

Analytical study and field investigation on the effects of clogging in slurry shield tunneling

Experimental investigation on rheological properties and diffusion-related performance of clay shock slurry for excavation gap filling during shield tunnelling

Analysis of muck migration behavior and suction port extending forward performance in the working chamber of the slurry shield machine under clay stratum

Three-Dimensional Seepage Flow Analysis Of Slurry Shield With Permeable Filter Cake

Experimental Study on the Effect of Temperature on the Characteristics of Cutterhead Mud Cake in Complex Red-Bed Geology

Research and Experimental Application of New Slurry Proportioning for Slag Improvement of EPB Shield Crossing Sand and Gravel Layer

Reuse of Discharged Soil from Slurry Shield Tunnel Construction as Synchronous Grouting Material

Characteristics and Countermeasures of Tunnel Heave Due to Large-Diameter Shield Tunneling Underneath

Combined conditioning of dispersant and foam agent for the soil with different clay minerals: an experimental study

Recycling the Discharged Soil from EPBS Tunnels As a Soil Conditioner and Its Rheological Behaviors

Experimental study and mechanism analysis of high-pressure water jet for mud cake cutting during shield tunneling

Mud Cake Improver Mul-GX with Lubrication and Interface Enhancement Effect and Its Action Mechanism

Performance of Slurry Shield Tunnelling in Mixed Strata Based on Field Measurement and Numerical Simulation