Effect of cutterhead driving parameters on clogging in clay strata: Observations from a model test
Yi Yang,Xinggao Li,Dalong Jin,Weilin Su,Yidong Guo,Yingran Fang
DOI: https://doi.org/10.1016/j.tust.2024.105825
IF: 6.9
2024-05-23
Tunnelling and Underground Space Technology
Abstract:Cutterhead clogging is a common challenge in shield tunneling construction, which can significantly impact project progress and efficiency. Inappropriate shield driving parameters and unfavorable geological conditions are two of the most important factors that may lead to clogging. However, the effect of shield driving parameters on cutterhead clogging has been rarely investigated due to limitations in experimental equipment. To address this gap, this study developed a model testing apparatus for shield cutterhead tunneling in clay formations. Laboratory model tests were conducted using different consistency clays and varying cutterhead driving parameters. The torque and thrust of the cutterhead were recorded, and the discharge of excavated clays through the cutterhead opening and the distribution of the clay stuck to the cutting wheel was analyzed. Based on the experimental results, recommendations for cutterhead driving control were provided and validated in the field. The experimental results demonstrated that higher cutterhead rotation speed and lower advance rate resulted in lower adhesion weight. Under the same excavation distance, increasing propulsion work led to more severe squeezing of the excavated clay by the cutterhead, resulting in higher adhesion forces and increased clogging potential. Conversely, increasing torsion work emphasized the cutting action between the cutterhead and excavated clay, leading to smaller adhesion weight and better prevention of clogging. In cases where the cutterhead was already clogged, excessively high cutterhead rotation speed resulted in elevated temperature, thereby increasing the adhesion forces between the clay and cutterhead and exacerbating the formation of mud cakes. Thus, a reasonable tunneling strategy for excavation in clay formations involves using lower advance rates and moderate cutterhead rotation speeds. The control criterion for such a strategy is to ensure the smooth discharge of excavated soil from the cutterhead opening without the need for additional thrust and torque.
construction & building technology,engineering, civil