Analytical study and field investigation on the effects of clogging in slurry shield tunneling
Meng-Bo Liu,Shao-Ming Liao,Zhen-Hao Shi,Han-Kai Liu,Li-Shen Chen
DOI: https://doi.org/10.1016/j.tust.2022.104957
IF: 6.9
2023-01-05
Tunnelling and Underground Space Technology
Abstract:The pressurized slurry is the essential part of the slurry pressure balanced shield (SPBS) for stabilizing the working face and transporting the excavated soil. If clogging occurs in case of adverse ground conditions or equipment failure, a series of consequences will happen, such as sudden changes in slurry pressure, massive ground loss, and deformation or even collapse at tunnel workface. The present study reviewed and summarized the clogging mechanism of the slurry shield under different ground conditions. Then, based on the law of conservation of mass and Bernoulli's Equation, an analytical approach was developed to investigate the effects of clogging on the slurry velocity and pressure along with the deformation of tunnel workface. Furthermore, a case study and field measurements were conducted to validate the analytical method. The significant findings drawn from the study can be summarized as follows: (1) The clogging of a slurry shield imposes severe effects on the slurry pressure balancing mechanism of shield tunneling. It can occur in both cohesive and non-cohesive ground with different formation mechanisms. (2) During the initial clogging, the slurry pressure above the spring line increases, and that below the spring line decreases. With the clogging deteriorating, the slurry velocity drops considerably at the top of the deposit area and escalates near the discharging port. The presence and increase of deposit lead to a sharp rise of slurry pressure in the slurry chamber, especially in the clogging region. (3) The reverse circulation of the slurry system (RCSS) is useful to clear the clogging. Still, the slurry deposits at the bottom will obstruct the slurry reverse flow, resulting in inward deformation of the tunnel face and a drastic increase in overcutting volume. (4) The ultimate volume deviation ratio of the slurry was proposed as a useful index to alarm the potential risk of collapse induced by the RCSS. (5) The timely adoption of RCSS is strongly suggested when any abnormal changes in the slurry pressure or the ultimate volume deviation ratio are observed for the first time.
construction & building technology,engineering, civil