Abstract:All-solid-state electrolytes provide a guarantee for the safe running of Li metal batteries (LMBs) with high energy density. Nevertheless, the low ionic conductivity and huge interfacial impedance between lithium anodes and electrolytes are the critical issues baffling their rapid development and practical application, particularly limiting their operation at room temperature. The introduction of ionic liquids (IL) is expected to solve the above problems. However, the effect of the IL-involved solid-state electrolytes on lithium dendrites suppression has not been clearly revealed and still necessitates in-depth evaluation. In this article, we report an in situ LiF-rich solidelectrolyte interphase (SEI) on the lithium anode triggered by reductive decomposition of IL and Li1.5Al0.5Ge1.5(PO4)3-involved electrolyte. For the first time, the mechanism of SEI formed on Li metal based on IL-based solid-state electrolyte was unveiled. A combination of experimental and computational investigation manifests that the presence of Li1.5Al0.5Ge1.5(PO4)3 promotes the release of fluorine anion from IL, and a SEI layer with high content of LiF can be generated in situ through the reductive decomposition of wandering fluorine anion. Thanks to the high mechanical modulus from Li1.5Al0.5Ge1.5(PO4)3, the symmetric Li|Li batteries equipped with synthesized solid-state composite electrolyte (SSCE) exhibit extremely stable Li plating/stripping behavior for more than 2700 h with a small polarization voltage of 50 mV at 0.1 mA cm-2. Moreover, the assembled solidstate Li|LiFePO4 batteries based on SSCE could operate steadily for 196 cycles at ambient temperature, with 90.7% capacity retention. These results provide a promising insight into the design of SSCE and realization of room temperature solid-state LMBs with high performance.

Stable Cycling of Solid-State Lithium Metal Batteries at Room Temperature via Reducing Electrode/Electrolyte Interfacial Resistance

Stable Cycling of All‐Solid‐State Lithium Metal Batteries Enabled by Salt Engineering of PEO‐based Polymer Electrolytes

A High-Performance, Solution-Processable Polymer/ceramic/ionic Liquid Electrolyte for Room Temperature Solid-State Li Metal Batteries

A promising composite room temperature solid electrolyte via incorporating LLZTO into cross-linked ETPTA/PEO/SN matrix for all solid state lithium batteries

Solid‐State Lithium Metal Batteries with Extended Cycling Enabled by Dynamic Adaptive Solid‐State Interfaces

Room-temperature Solid-State Metallic Lithium Batteries Based on High-Content Boron Nitride Nanosheet-Modified Polymer Electrolytes

Ionic Liquid Enabling Stable Interface in Solid State Lithium Sulfur Batteries Working at Room Temperature

Toward robust solid-state lithium metal batteries by stabilizing a polyethylene oxide-based solid electrolyte interface with a biomass polymer filler

Vanadium-doped Li6.7La3Zr1.7V0.3O12 and PVDF-HFP Enhanced the Ionic Conductivity and Cycling Stability of Composite Solid Electrolytes for All-Solid-State Lithium Batteries

Minimizing the Interfacial Resistance for a Solid-State Lithium Battery Running at Room Temperature

Stabilize Garnet/Electrode Interface via Low-melting Polymer Layer in Solid-state Lithium Metal Battery

Tailoring Heterogeneous Interfacial Chemistry Enables Long-Term Cycling of All-Solid-state Lithium-Metal Batteries

Unleashing the Potential of Li-Metal Batteries A Breakthrough Ultra-High Room-Temperature Ionic Conductivity Composite Solid-State Electrolyte

Constructing robust cathode/Li interfaces and intensifying ion transport kinetics for PEO-based solid-state lithium-sulfur batteries

Integrated Design for Regulating the Interface of a Solid-State Lithium-Oxygen Battery with an Improved Electrochemical Performance.

Poly(ethylene oxide)-based composite solid electrolyte for long cycle life solid-state lithium metal batteries: Improvement of interface stability through a dual mechanism

High voltage stable cycling of all-solid-state lithium metal batteries enabled by top-down direct fluorinated poly (ethylene oxide)-based electrolytes

High-Performance Poly(vinylidene fluoride-hexafluoropropylene)-Based Composite Electrolytes with Excellent Interfacial Compatibility for Room-Temperature All-Solid-State Lithium Metal Batteries

A thin composite polymer electrolyte with high room-temperature conductivity enables mass production for solid-state lithium-metal batteries

Room‐Temperature Solid‐State Lithium Metal Batteries Using Metal Organic Framework Composited Comb‐Like Methoxy Poly(ethylene Glycol) Acrylate Solid Polymer Electrolytes

Stable all-solid-state lithium metal batteries enabled by ultrathin LiF/Li3Sb hybrid interface layer