Abstract:Improving the long-term cycling stability of solid-state lithium (Li)-metal batteries (SSBs) is a severe challenge because of the notorious solid-solid interfacial contact loss originating from the repeated expansion and contraction of the Li anodes. Here, it is reported that high-performance SSBs are enabled by constructing brick-and-mortar electrolytes that can dynamically adapt to the interface changes during cycling. An electrolyte film with a high mechanical strain (250%) is fabricated by filling viscoelastic (600% strain) and piezoelectric block-copolymer electrolytes (mortar) into a mixed conductor Li0.33 La0.56 TiO3-x nanofiber film (brick). During Li-plating, the electrolytes can homogenize the interfacial electric field and generate piezoelectricity to promote uniform Li-deposition, while the mortar can adhere to the Li-anode without interfacial disintegration in the reversed Li-stripping. As a result, the electrolytes show excellent compatibility with the electrodes, leading to a long electrochemical cyclability at room temperature. The symmetrical Li//Li cells run stably for 1880 h without forming dendrites, and the LiFePO4 /Li full batteries deliver high coulombic efficiency (>99.5%) and capacity retention (>85%) over 550 cycles. More practically, the pouch cells exhibit excellent flexibility and safety for potential practical applications.

What problem does this paper attempt to address?

### Problems the paper attempts to solve This paper aims to solve the problem of solid - solid interface contact loss in solid - state lithium - metal batteries (SSBs) during long - term cycling due to the repeated expansion and contraction of the lithium - metal anode. This interface contact loss is one of the key challenges affecting the performance and lifespan of solid - state lithium - batteries. Specifically, the paper focuses on the following problems: 1. **Interface contact loss**: During the charge - discharge process, the lithium - metal anode constantly undergoes volume changes, leading to the rupture and re - formation of the solid - electrolyte interface (SEI), which in turn causes poor interface contact and a decline in battery performance. 2. **Dendrite growth**: Lithium metal is prone to form uneven lithium dendrites during the deposition and stripping processes. These dendrites may penetrate the solid electrolyte, resulting in an internal short - circuit and seriously affecting the safety and cycling stability of the battery. 3. **Mechanical stress accumulation**: As the number of cycles increases, the mechanical stress at the interface gradually accumulates and may eventually lead to interface separation, further exacerbating the above problems. ### Solutions To solve these problems, researchers have developed an intelligent electrolyte thin film with an "brick - mortar" structure with adaptive dynamic interface characteristics. The main features of this electrolyte thin film include: - **High mechanical strain and viscoelasticity**: By filling a polymer electrolyte with high elasticity and piezoelectric properties (such as PVDF - b - PTFE) into a mixed - conductor LLTO nanofiber framework, an electrolyte thin film with a high mechanical strain (250%) and large viscoelasticity (600% strain) is formed. - **Adaptive interface regulation**: This electrolyte thin film can homogenize the interface electric field during the lithium - metal deposition process and generate an instantaneous electric field through the piezoelectric effect, promoting the uniform deposition of lithium and reducing the risk of dendrite growth. - **Long - term stable interface contact**: Even when the shape of the lithium - metal anode changes, this electrolyte thin film can still maintain good contact with the electrode, avoiding interface separation and mechanical stress accumulation. Through these innovative designs, researchers have successfully improved the cycling stability and safety of solid - state lithium - metal batteries, achieving stable cycling for up to 1880 hours without dendrite formation, and the full battery exhibits high Coulombic efficiency (> 99.5%) and capacity retention rate (> 85%). In addition, the pouch battery also shows excellent flexibility and safety, which is suitable for practical applications. ### Summary This paper effectively solves the problems of interface contact loss, dendrite growth, and mechanical stress accumulation faced by solid - state lithium - metal batteries during long - term cycling by introducing a new - type "brick - mortar" - structure electrolyte thin film, significantly improving the performance and safety of the battery.

Solid‐State Lithium Metal Batteries with Extended Cycling Enabled by Dynamic Adaptive Solid‐State Interfaces

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

Interfacial Plasticization Strategy Enabling a Long-Cycle-Life Solid-State Lithium Metal Battery

Interfacial self-healing polymer electrolytes for long-cycle solid-state lithium-sulfur batteries

Integrated Structure of Cathode and Double-Layer Electrolyte for Highly Stable and Dendrite-Free All-Solid-State Li-Metal Batteries

Integrated Design of a Functional Composite Electrolyte and Cathode for All-Solid-State Li Metal Batteries

Long Cycling Life Solid-State Li Metal Batteries with Stress Self-Adapted Li/Garnet Interface

All-Solid-State Lithium-Sulfur Batteries of High Cycling Stability and Rate Capability Enabled by a Self-Lithiated Sn-C Interlayer

Integrated solid-state Li-metal batteries mediated by 3D mixed ion-electron conductive anodes and deformable molten interphase

Exceptional interfacial conduction and LiF interphase for ultralong life PEO-based all-solid-state batteries

Li 3 N interlayer enables stable long-term cycling for sulfide-based all-solid-state Li metal batteries

Stable all-solid-state lithium metal batteries enabled by ultrathin LiF/Li3Sb hybrid interface layer

Multiple Dynamic Bonds‐Driven Integrated Cathode/Polymer Electrolyte for Stable All‐Solid‐State Lithium Metal Batteries

Self-adaptive multiblock-copolymer-based hybrid solid-state electrolyte for safe and stable lithium-metal battery

Molecular Coordination Induced High Ionic Conductivity of Composite Electrolytes and Stable LiF/Li 3 N Interface in Long-Term Cycling All-Solid-State Lithium Metal Batteries

A High Ion Conductive Solid Electrolyte Film and Interface Stabilization Strategy for Solid-state Li-S Battery

In Situ Construction a Stable Protective Layer in Polymer Electrolyte for Ultralong Lifespan Solid‐State Lithium Metal Batteries

In-Situ Polymerized High-Voltage Solid-State Lithium Metal Batteries with Dual-Reinforced Stable Interfaces

In situ Construction of Robust Biphasic Surface Layers on Lithium Metal for Lithium-Sulfide Batteries with Long Cycle Life

Favorable Interfacial Chemomechanics Enables Stable Cycling of High Li-Content Li-In/Sn Anodes in Sulfide Electrolyte Based Solid-State Batteries

Minimizing Undesired Side Reactions Induced by Nanoscale Conductive Carbon Enables Stable Cycling of Semi‐Solid Li‐Ion Full Batteries