Abstract:A high load capacity non-pneumatic tire (HC tire) was designed and manufactured to solve the problems of air leakage, puncture, blowout, shoulder void, and delamination, which occur in traditional high load capacity tires, as well as significantly increase the unit load of tires. Experiments and numerical simulations were conducted to investigate the static stiffness properties of the HC tire. Additionally, the manufacturing process of the tire was highlighted. The tire mainly comprised polyurethane and silicon manganese steel, and a 'π'-shaped support substructure was adopted. The tread structure was made up of a built-in spiral steel ring and a non-steel ring. The uniaxial tensile mechanical properties of the used metal and elastomer materials were tested, and the linear elastic constitutive model and Marlow constitutive model, respectively, were used to describe their mechanical characteristics. The stiffness properties of the HC tire, including torsional, longitudinal, vertical, and lateral stiffnesses, were evaluated using a tire comprehensive stiffness tester. Nonlinear finite element models of the HC tire were established, and their accuracies were verified through vertical stiffness tests. The stiffness properties of the HC tire in other directions were simulated as well. An in-depth comparative analysis of the simulation and experimental data was performed. The results demonstrated that the unit load of the unreinforced HC tire was 2.972 times and 1.615 times higher than that of the solid tire and pneumatic tire, respectively. The spiral steel ring embedded in the tread increased the vertical and longitudinal stiffness but reduced the torsional stiffness of the HC tire, thus reversing the variation trend of the lateral stiffness at the 0° and 5° test points. The findings can serve as a reference for theoretical research on, and the structural optimization of, non-pneumatic tires with a high load capacity.

Structural design and characteristics of a non-pneumatic tire with honeycomb structure

Static and Dynamic Mechanical Characteristics of Honeycomb Non-Pneumatic Tire under Structural Damage Condition

Investigation on the Static and Dynamic Behaviors of Non-Pneumatic Tires with Honeycomb Spokes

Comparative study of static and dynamic characteristics of non-pneumatic tires with gradient honeycomb structure

Investigation on mechanical characteristics of non-pneumatic tire with rhombus structure under complex pavement conditions

Investigation of Additive-Manufactured Carbon Fiber-Reinforced Polyethylene Terephthalate Honeycomb for Application as Non-Pneumatic Tire Support Structure

Research on Non-Pneumatic Tire with Gradient Anti-Tetrachiral Structures

Performance analysis and multi-objective optimization of a non-pneumatic tire with bionic petal spokes

Design and simulation of a new type of composite flexible-spoke non-pneumatic tire

A New Kind of Non-Pneumatic Tire for Attenuating Vibration

Pattern design and performance analysis of a flexible spoke bionic non-pneumatic tire

Static Stiffness Properties of High Load Capacity Non-Pneumatic Tires with Different Tread Structures

Study on the Load-Bearing Characteristics Analysis Model of Non-Pneumatic Tire with Composite Spokes

TPMS-based auxetic structure for high-performance airless tires with variable stiffness depending on deformation

Meta-honeycomb sandwich tubes: Designing, manufacturing, and crashworthiness performance

Topological structure and experimental investigation of a novel whole tire bead

Dynamic Crushing Behaviors of Multi-Layered Gradient Honeycombs with Different Poisson’s Ratios: A Finite Element Simulation

Construction analysis of non-pneumatic tires

Key dynamic performance analysis of flexible spoke non-pneumatic tire for matched unmanned ground vehicles

Study on Concave Direction Impact Performance of Similar Concave Hexagon Honeycomb Structure

Energy-Absorption Behavior of Novel Bio-Inspired Thin-Walled Honeycomb Tubes Filled with TPMS Structure