Abstract:This work seeks to understand how the topography of a surface can be engineered to control secondary electron emission (SEE) for multipactor suppression. Two unique, semi-empirical models for the secondary electron yield (SEY) of a micro-porous surface are derived and compared. The first model is based on a two-dimensional (2D) pore geometry. The second model is based on a three-dimensional (3D) pore geometry. The SEY of both models is shown to depend on two categories of surface parameters: chemistry and topography. An important parameter in these models is the probability of electron emissions to escape the surface pores. This probability is shown by both models to depend exclusively on the aspect ratio of the pore (the ratio of the pore height to the pore diameter). The increased accuracy of the 3D model (compared to the 2D model) results in lower electron escape probabilities with the greatest reductions occurring for aspect ratios less than two. In order to validate these models, a variety of micro-porous gold surfaces were designed and fabricated using photolithography and electroplating processes. The use of an additive metal-deposition process (instead of the more commonly used subtractive metal-etch process) provided geometrically ideal pores which were necessary to accurately assess the 2D and 3D models. Comparison of the experimentally measured SEY data with model predictions from both the 2D and 3D models illustrates the improved accuracy of the 3D model. For a micro-porous gold surface consisting of pores with aspect ratios of two and a 50% pore density, the 3D model predicts that the maximum total SEY will be one. This provides optimal engineered surface design objectives to pursue for multipactor suppression using gold surfaces.

A cylindrical envelope projection model for estimation of secondary electron intensity distribution at micro-steps

Super-Resolution Microscopy Based on Fluorescence Emission Difference of Cylindrical Vector Beams

Electron Transfer/Ion Transfer Mode of Scanning Electrochemical Microscopy (secm): A New Tool for Imaging and Kinetic Studies

Study of Intrinsic Defect States of FeSe with Scanning Tunneling Microscopy

Quantitative material analysis using secondary electron energy spectromicroscopy

Direct Imaging of Electron Orbitals with a Scanning Transmission Electron Microscope

Limits of model-based CD-SEM metrology

Secondary-electron imaging of bulk crystalline specimens in an aberration corrected STEM

Note: Symmetric Modulation Methodology Applied In Improving The Performance Of Scanning Tunneling Microscopy

Thermomechanical Modeling of Scanning Joule Expansion Microscopy Imaging of Single-Walled Carbon Nanotube Devices

In-Lens Band-Pass Filter for Secondary Electrons in Ultrahigh Resolution SEM

Electron beam-induced current imaging with two-angstrom resolution

High-efficiency detector of secondary and backscattered electrons for low-dose imaging in the ESEM

Wave Optical Modeling of the SEM Column From Source to Specimen

Modeling micro-porous surfaces for secondary electron emission control to suppress multipactor

Bright-field Scanning Confocal Electron Microscopy Using a Double Aberration-Corrected Transmission Electron Microscope

Inverse Modeling of Heterogeneous Structures in Electron Probe Microanalysis

Resolving the Electron Plume within a Scanning Electron Microscope

Fabrication and Characterization of a High-Performance Multi-Annular Backscattered Electron Detector for Desktop SEM

A calculation approach for current density distribution evolution of secondary electrons using differential algebra method