A wireless implantable multichannel digital neural recording system for a micromachined sieve electrode

T. Akin,K. Najafi,R.M. Bradley

DOI: https://doi.org/10.1109/4.654942

1998-01-01

Abstract:This paper reports the development of an implantable, fully integrated, multichannel peripheral neural recording system, which is powered and controlled using an RF telemetry link. The system allows recording of /spl plusmn/500 /spl mu/V neural signals from axons regenerated through a micromachined silicon sieve electrode. These signals are amplified using on-chip 100 Hz to 3.1 kHz bandlimited amplifiers, multiplexed, and digitized with a low-power (<2 mW), moderate speed (8 /spl mu/s/b) current-mode 8-b analog-to-digital converter (ADC). The digitized signal is transmitted to the outside world using a passive RF telemetry link. The circuit is implemented using a bipolar CMOS process. The signal processing CMOS circuitry dissipates only 10 mW of power from a 5-V supply while operating at 2 MHz and consumes 4/spl times/4 mm/sup 2/ of area. The overall circuit including the RF interface circuitry contains over 5000 transistors, dissipates 90 mW of power, and consumes 4/spl times/6 mm/sup 2/ of area.

engineering, electrical & electronic