Abstract:Amorphous Fe73.5-xCoxSi13.5B9Cu1Nb3（x=10,30,50） ribbons were prepared by the single copper wheel melt spinning technique in the air atmosphere.The nanocrystallization kinetics of amorphous ribbons was investigated by differential scanning calorimetry（DSC）.The apparent activation energies of amorphous ribbons were calculated by using Kissinger and Ozawa methods.It was found that the activation energies of the first crystallization reduce and those of the second crystallization rise with increasing Co content.The local Avrami parameter m for primary crystallization was calculated using Johnson-Mehl-Avrami（JMA） model.The values of the Avrami parameter showed that the primary crystallization mechanism of amorphous ribbons varied at different stages.In the initial stage,the crystallization mechanism was bulk crystallization with three dimensional nucleation and grain growth controlled by diffusion.In the following stage,it was surface crystallization with one dimensional nucleation and grain growth at a near zero nucleation rate.The variation of soft magnetic properties of nanocrystalline Fe63.5Co10Si13.5B9Cu1Nb3 powder cores as a function of milling time has been investigated.It was found that the effective permeability of the cores shows high frequency stability and decreases with increasing milling time.The quality factor increases with increasing frequency in the lower frequency range,reaches a maximum at the frequency of 80 kHz,and then decreases gradually with increasing frequency.

On the role of a magnetic coupling between crystalline grains in nanocrystalline alloys

High-temperature Magnetic Properties of Fe-based Nanocrystalline Alloy

Effect of Annealing on the Microstructure and Magnetic Properties of Fe-based Nanocomposite Materials

Crystallization Kinetics of Co-Finemet Amorphous Alloys and Magnetic Properties of Nanocrystalline Powder Cores

Roles of Cu in Fe-based Soft Magnetic Nanocrystalline Alloys with High Fe Content

On the theoretical understanding of nanocrystalline soft magnetic materials

Crystallization Kinetics and Magnetic Properties of Fe73.5si13.5b9cu1nb1v2 Nanocrystalline Powder Cores

Magnetic properties of the composition of nanocrystals and amorphous matrix in an alloy of the Fe-Nb-Si-B-Cu system

Evolution from Amorphous to Nanocrystalline and Corresponding Magnetic Properties of Fe-Si-B-Cu-Nb Alloys by Melt Spinning and Spark Plasma Sintering

Crystallization kinetics and magnetic properties of Fe 63.5Co10Si13.5B9Cu 1Nb3 nanocrystalline powder cores

Grain refinement mechanism of soft-magnetic alloys with nanocrystals embedded in amorphous matrix

Atomic level simulation of amorphous/nanocrystalline transition behavior in the Fe based amorphous alloys

Thermomagnetic Analysis of the Crystallization in Soft Magnetic Nanocrystalline Alloys

Magnetization controlled by crystallization in soft magnetic Fe-Si-B-P-Cu alloys

Unusual alloying effects of Co and Ni on structure and magnetic properties of Fe-Si-B-Cu nanocrystalline alloys with pre-existing α-Fe nanocrystals

Influence of microstructure and anisotropy on the high-frequency soft magnetic properties of nanocrystalline FeSiBNbCuP alloys

Magnetic Properties of Amorphous Nanocrystalline Alloys Based on Iron with Different Contents of Nobium in Structural Relaxation Processes

Nanocrystalline iron-based alloys investigated by Mössbauer spectrometry

Structural and magnetic properties of the nanocrystalline alloy Fe86Zr7Cu1B6

Crystallization behavior, soft magnetic properties and good bending ductility of high Fe content FeSiBCuPC alloys induced by composition design