Abstract:Many countries in and around the world have conducted various studies on biodiesel usage over common rail direct injection (CRDI) diesel engines, among which waste cooking oil (WCO) biodiesel has made a major impact on diesel engine research because of its cost-efficient nature and elimination of waste disposal. The deposits of carbon and very high viscosity are some of the key factors which deteriorate the usage of raw WCO biodiesel. Lower volume proportionate blends of WCO biodiesel produce excellent combustion characteristics reducing hydrocarbon (HC), carbon mono oxide (CO), and soot emissions, but they seem to promote the formation of nitrous oxides (NOx). As a solution to overcome this problem, polyoxymethylene dimethyl ether (PODE) with lower viscosity, higher oxygen content, high cetane number, showing better combustion characteristics with a good soot-NOx trade-off is selected for the present research work. The novelty of the current research work shows the reduction of soot and NOx emissions using PODE/WCO/Diesel blends by varying the proportions in a conventional combustion mode of a CRDI diesel engine without any modifications which was lagging by the previous researches. A trans-esterified WCO biodiesel is blended with diesel in varying volumes as 10, 20, and 30%. The chemical properties of the blend fuels were determined using ASTM standards. The investigation was carried out and it was found that W20 blend fuel showed a highest reduction of 21.11%, 23.51%, and 22.45% of CO, HC, and soot emissions respectively with a rise of 6.39% of NOx emissions. W20 blend with a good soot-NOx trade-off was selected in which PODE was blended in varying proportions such as 10, 20, and 30% respectively. The properties of the test fuels were determined and the further investigation was carried out. This second stage of reduction was done in determining the fuel with excellent soot-NOx trade-off without compromising the performance of the engine. It was found that W20P20 blend fuel showed the highest reduction of 33.86%, 50.78%, and 80.86% of HC, CO, and Soot emissions with a slight increase of 0.78% of NOx emissions. Brake Thermal Efficiency was found better for W20P20 fuel in comparison with W20 fuel. Thus, two stages of reduction in emissions were carried out with the aim of meeting the stringent emissions norms in the conventional diesel combustion technique.

Evaluating the Influence of Cetane Improver Additives on the Outcomes of a Diesel Engine Characteristics Fueled with Peppermint Oil Diesel Blend

Engine Performance and Emissions of A Compression Ignition Engine Operating on the Diesel-Methanol Blends

Performance and emission study on the effect of oxygenated additive in neat biodiesel fueled diesel engine

Experimental Study of Cetane Number on Methanol/Biodiesel Combustion Characteristics

A Comprehensive Study on the Effect of Dimethyl Carbonate Oxygenate and EGR on Emission Reduction, Combustion Analysis, and Performance Enhancement of a CRDI Diesel Engine Using a Blend of Diesel and Prosopis juliflora Biodiesel

Environmental and performance impacts of 2-ethylhexyl nitrate and ethanol in diesel blends: A comprehensive study

Reducing NOx emission from palm biodiesel/diesel blends in CI engine: A comparative study of cetane improvement techniques through hydrogenation and fuel additives

Comparative thermal assessment and emission analysis of various green biodiesel from novel feedstocks for CI engines: a sustainable approach towards emission reduction

Diesel Emission Improvements by the Use of Oxygenated DME/diesel Blend Fuels

Detailed experimental investigation and optimization of oxygenated diglyme–diesel–n-pentanol ternary blends on compression ignition engine behaviors

Emission Characteristics Using Methyl Soyate-Ethanol-Diesel Fuel Blends on A Diesel Engine

Potential improvement in conventional diesel combustion mode on a common rail direct injection diesel engine with PODE/WCO blend as a high reactive fuel to achieve effective Soot-NOx trade-off

Use of 2-methoxyethyl ether and nitromethane as oxygenated additives for performance improvement and emission reduction of CI engine: experimental investigation and numerical simulation

Vibration analysis using wavelet transformation technique and performance characteristics of a diesel engine fueled with tamarind biodiesel-diesel blends and diverse additives

Combustion and Emission Characteristics of Diesel Engine Fueled with Biodiesel/pode Blends

Performance of A Direct Injection Diesel Engine Fuelled with A Dimethyl Ether/Diesel Blend

Experimental investigation of Performance, Emission, and Combustion characteristics of a diesel engine using blends of Waste Cooking Oil-Ethanol biodiesel with MWCNT nanoparticles

Experimental Investigation on Performance of a Compression Ignition Engine Fueled with Waste Cooking Oil Biodiesel–Diesel Blend Enhanced with Iron-Doped Cerium Oxide Nanoparticles

Effects of Ethylhexyl Nitrate, Diesel and Gasoline Blends on Diesel Engine Performances: from Engine Experiment to Vehicle Test

Impact of Using n-Octanol/Diesel Blends on the Performance and Emissions of a Direct-Injection Diesel Engine

Performance and Emission Analysis of Biodiesel Blends in a Low Heat Rejection Engine with an Antioxidant Additive: An Experimental Study