Abstract:This experimental study was conducted with a heavy-duty diesel engine fuelled with dimethyl ether (DME). The combustion and emission characteristics of DME engine were investigated. The results show that the peaks of in-cylinder pressure, heat release rate (HRR), pressure rise rate (PRR), and mean gas temperature of the DME engine are lower than those of diesel engines. For DME engines, with increase in the engine load, the diagram of HRR varies from two peaks to a single peak. With increasing engine speed under the same mean effective pressure, the ignition timing is delayed, and the heat release centroid gradually moves away from the top death centre (TDC). The DME engine with an injector of six holes and a Plunger of larger diameter exhibits a good performance owing to a faster diffusion combustion. With increase in fuel delivery advance angle at rated power, the ignition timing advances, and the centroid of the HRR is near the TDC. However, the peak of the HRR is at the same level. The results also show that higher torque and power can be achieved with DME than with diesel fuel operation at full load. At full load, the fuel consumption at low engine speeds with DME is lower than with diesel fuel, and nitrogen oxide emissions of the DME engine decrease markedly. Hydrocarbon emissions reduce while carbon monoxide emission slightly increases. The combustion of the DME engine is free of smoke throughout all the operating points. As DME is an oxygenated fuel, its combustion produces less carbon dioxide than that from diesel combustion. European stationary cycle emission test results show that the emissions from the DME engine are below the limits of the Euro 3 regulations.

Performance of A Direct Injection Diesel Engine Fuelled with A Dimethyl Ether/Diesel Blend

Engine Performance and Emissions of A Compression Ignition Engine Operating on the Diesel-Methanol Blends

Combustion and Emission Characteristics of a DI Diesel Engine Fueled by Diesel-Methanol Blends

Study on Performances and Emission Characteristics of Direct Injection Diesel Engine Fueled with Blend of Dimethyl Ether/Diesel Fuel

Study on the performance and emissions of a compression ignition engine fuelled with dimethyl ether

Investigation on the Performance and Emissions of Direct Injection Diesel Engine Fuelled with Diesel-DMM Blends

Investigation of the Performances of Diesel Engine Fueled with Dimethyl Ether and Vehicle Driving Tests

Diesel Emission Improvements by the Use of Oxygenated DME/diesel Blend Fuels

Engine performance and emission characteristics of a compression ignition engine fuelled with diesel/dimethoxymethane blends

Performance and Emission Characteristics of Diesel Engines Fueled with Diesel−Dimethoxymethane (DMM) Blends

An Investigation on Combustion and Exhaust Emissions of Direct Injection Diesel Engine Fuelled with Dimethyl Ether

Study on the Application of DME/diesel Blends in a Diesel Engine

Combustion and Emission Characteristics of a Compression Ignition Engine Fuelled with Diesel–dimethoxy Methane Blends

Study on Emission Characteristics of Direct Injection Diesel Engine Fueled with Dimethyl Ether

Study of Combustion Characteristics of a Compression Ignition Engine Fuelled with Dimethyl Ether

Study on Combustion and Emission Characteristics of a Vehicle Engine Fuelled with Dimethyl Ether

Combustion and performance of heavy-duty diesel engines fuelled with dimethyl ether

Combustion Characteristics and Heat Release Analysis of A Compression Ignition Engine Operating on A Diesel/Methanol Blend

Study on the Performance and Emissions of a Direct Injection Diesel Engine Fuelled with Diesel/Ethanol Blends

Combustion and Emission Characteristics of A Turbocharged Diesel Engine Fuelled with Dimethyl Ether

Combustion and Emission Characteristics of a Direct-Injection Diesel Engine Fueled with Diesel−Diethyl Adipate Blends