Study on Combustion Characteristics of a DI Diesel Engine Operating on Diesel/Methanol Blends

黄佐华,卢红兵,蒋德明,曾科,刘兵,张俊强,王锡斌
DOI: https://doi.org/10.3321/j.issn:1000-0909.2003.06.004
2003-01-01
Abstract:A stabilized diesel/methanol blend was realized and the combustion characteristics and heat release analysis of the diesel/methanol blend was carried out in a DI diesel engine. The study showed that the increase of methanol mass fraction of diesel/methanol blends will result in the increase of heat release rate in premixed burning phase and shorten the combustion duration of diffusive burning phase. Ignition delay increases with the increase of methanol mass fraction and the behavior is more obviously at low engine load and high engine speed. Rapid burn duration varies less with methanol mass fraction and the total combustion duration decreases with the increase of methanol mass fraction. At a low engine speed, the centre of heat release curve tends to be close to the top-dead-centre with the increase of methanol mass fraction at all engine loads and fuel delivery advance angles, and the maximum rate of pressure rise and the maximum rate of heat release increase with the increase of methanol mass fraction. At a high engine speed, the centre of heat release curve closes to the top-dead-centre with the increase of methanol mass fraction at high engine load and will depart from the top-dead-centre at low engine load, and the maximum rate of pressure rise and the maximum rate of heat release gives an increasing trend with the increase of the methanol mass fraction and a slight decreasing trend with further increasing of methanol mass fraction. Maximum cylinder gas pressure increases with the increase of methanol mass fraction when oxygen mass fraction is less than 6%, and then it remains a constant value or drops slightly with a further increase of oxygen mass fraction. Maximum mean gas temperature remains almost unchangeable versus methanol mass fraction.
What problem does this paper attempt to address?