Abstract:Bi2Te3-based compounds are thermoelectric materials with the best performance near room temperature. The existence of a large number of complex defects makes defect engineering a core stratagem for adjusting and improving the thermoelectric performance. Therefore, understanding and effectively controlling the existence form and concentration of defects is crucial for achieving high-thermoelectric performance in Bi2Te3-based alloy. Herein, a series of Cl doped n-type quaternary Bi2-xSbxTe3-ySey compounds is synthesized by the zone-melting method. The correlation between defect evolution process and thermoelectric performance is systematically investigated by first-principles calculation and experiments. Alloying Sb on Bi site and Se on Te site induce charged structural defects, leading to a significant change in the carrier concentration. For Bi2-xSbxTe2.994Cl0.006 compounds, alloying Sb on Bi site reduces the formation energy of the antisite defect, which generates the antisite defect and accompanied with the increase of the minority carrier concentration from 2.09x10(16) to 3.99x10(17) cm(-3). The increase of the minority carrier severely deteriorates the electrical transport properties. In contrast, alloying Se in the Bi1.8Sb0.2Te2.994-ySeyCl0.006 compound significantly lowers the formation energy of the complex defect +, which becomes more energetically favorable and suppresses the formation of the antisite defect. As a result, the concentration of minority carriers decreases to 1.46x10(16) cm(-3). This eliminates the deterioration effect of the minority carrier on the electrical transport properties of the material and greatly improves the power factor. A maximum power factor of 4.49 mW/(m center dot K-2) is achieved for Bi1.8Sb0.2Te2.944Se0.05Cl0.006 compound at room temperature. By reducing thermal conductivity through intensifying the phonon scattering via alloying Sb and Se, the maximum ZT value of 0.98 is attained for Bi1.8Sb0.2Te2.844Se0.15Cl0.006 compound at room temperature. Our finding provides an important guidance for adjusting point defects, carrier concentrations, and thermoelectric performances in Bi2Te3-based compounds with complex compositions.

Point defect approach to enhance the thermoelectric performance of Zintl-phase BaAgSb

Defect Modulation on CaZn1-xAg1-ySb (0 < X < 1; 0 < Y < 1) Zintl Phases and Enhanced Thermoelectric Properties with High Zt Plateaus

Enhanced Thermoelectric Performance of Zintl Phase Ca9Zn4+ xSb9 by Beneficial Disorder on the Selective Cationic Site

Promising Zintl-Phase Thermoelectric Compound SrAgSb

Enhancing thermoelectric performance of AB 2 Sb 2 -type Zintl phase through band shaping and lattice distortion

Defect Chemistry, Phase Transitions, and Thermoelectric Properties of Ca1–xCexAg1–ySb (0 ≤ X ≤ 1; 0 ≤ Y ≤ 1)

Modulated Fermi Level and Relaxed Lattice Strain Leading to Enhanced Thermoelectric Properties in AgSbSe 2

Realizing high thermoelectric performance in p-type CaZn2Sb2-alloyed Mg3Sb2-based materials via band and point defect engineering

Integrating band engineering with point defect scattering for high thermoelectric performance in Bi2Si2Te6

Zintl Phase Yb 1– x Ba x Mg 2 Bi 1.98 Compounds with Enhanced Thermoelectric Performance Caused by Cation Substitution

Defect Structure Regulation and Thermoelectric Transfer Performance in N-Type Bi2-xSbxTe3-ySey-based Compounds

Enhancing Thermoelectric Performance in P-Type Sb2Te3-Based Compounds Through Nb─Ag Co-Doping with Donor-Like Effect.

Enhancing thermoelectric performance of Sb2Te3 through swapped bilayer defects

Zintl-phase Eu2ZnSb2: A promising thermoelectric material with ultralow thermal conductivity

Enhanced Thermoelectric Performance in SmMg 2 Bi 2 via Ca-Alloying and Ge-Doping

Enhancing Thermoelectric Performance in P‐Type Sb 2 Te 3 ‐Based Compounds Through Nb─Ag Co‐Doping with Donor‐Like Effect

Improvement of the Thermoelectric Properties of p-Type Mg 3 Sb 2 by Mg-Site Double Substitution

Zn-Induced Defect Complexity for the High Thermoelectric Performance of n-Type PbTe Compounds

Point Defect Engineering of High‐Performance Bismuth‐Telluride‐Based Thermoelectric Materials

Enhanced Thermoelectric Performance Through Optimizing Structure of Anionic Framework in AgCuTe-based Materials

Enhancement on thermoelectric performance by Ti doping and vacancies