Abstract:The nonuniform and localized deformations of ductile single crystals subject to tensile loading are analyzed numerically. The crystal is modelled by a rate independent, elastic-plastic relation based on Schmid's law which precisely accounts for lattice rotations. Both self hardening and latent hardening of the slip systems are included in the model. The crystal geometry is idealized in terms of a planar double slip model. Initial imperfections are specified in the form of slight thickness inhomogeneities and the calculations follow the crystal deformation through diffuse necking and the formation of shear bands. The pattern of shear bands depends on the initial imperfection, but, independent of the particular small imperfection, the material planes of the bands are inclined at a characteristic angle to the slip planes. Also, the lattice misorientation across the shear band, which is such as to cause geometrical softening of the bands, is not sensitive to the imperfection form. For high strength, low hardening crystals a comparison with existing experimental data shows remarkably good qualitative and quantitative agreement between the calculations and observations. We also model a relatively soft high hardening crystal which undergoes more diffuse necking than the strong high hardening crystal. Diffuse necking leads to lattice rotations which produce geometrical softening and hence promote shear band formation. Furthermore, we carry out a calculation for a high strength low hardening crystal with the latent hardening rate prescribed somewhat larger than for isotropic hardening. In this case a ‘patchy’ pattern of slip emerges. However, the course of shear band development is unaffected.

Cleavage crack formation and the effect of the structure of the nucleating deformation process

Cylindrical Void in a Rigid-Ideally Plastic Single Crystal. Part I: Anisotropic Slip Line Theory Solution for Face-Centered Cubic Crystals

An analysis of nonuniform and localized deformation in ductile single crystals

Effects of crack tip geometry on dislocation emission and cleavage: A possible path to enhanced ductility

Cohesive Dynamics and Brittle Fracture

Intergranular fracture, grain-boundary structure, and dislocation-density interactions in FCC bicrystals

The inhomogeneity of plastic deformation in ductile single crystals

A Combined Dislocation - Cohesive Zone Model for Fracture in A Confined Ductile Layer

Atomic insights into the ductile–brittle competition of cracks under dissolution

Brittle Damage Processes Around Equi‐Dimensional Pores or Cavities in Rocks: Implications for the Brittle‐Ductile Transition

An Athermal Brittle to Ductile Transition in Amorphous Solids

Elastic instability behind brittle fracture

Dislocation shielding and crack tip decohesion at the atomic scale

Effect of Crack Blunting on Subsequent Crack Propagation

Continuum modeling of twinning, amorphization, and fracture: theory and numerical simulations

The Effect of Stacking Faults or Twin Formation on Crack Propagation in Bcc Iron

The brittle-ductile transition in silicon. II. Interpretation

Brittle to Quasi-Brittle Transition and Crack Initiation Precursors in Disordered Crystals

Fracture Toughness of Crystalline Solids

A continuum description of nonlinear elasticity, slip and twinning, with application to sapphire

Strain Field Around Individual Dislocations Controls Failure