Abstract:Cu2–xS has become one of the most promising thermoelectric materials for application in the middle-high temperature range. Its advantages include the abundance, low cost, and safety of its elements and a high performance at relatively elevated temperatures. However, stability issues limit its operation current and temperature, thus calling for the optimization of the material performance in the middle temperature range. Here, we present a synthetic protocol for large scale production of covellite CuS nanoparticles at ambient temperature and atmosphere, and using water as a solvent. The crystal phase and stoichiometry of the particles are afterward tuned through an annealing process at a moderate temperature under inert or reducing atmosphere. While annealing under argon results in Cu1.8S nanopowder with a rhombohedral crystal phase, annealing in an atmosphere containing hydrogen leads to tetragonal Cu1.96S. High temperature X-ray diffraction analysis shows the material annealed in argon to transform to the cubic phase at ca. 400 K, while the material annealed in the presence of hydrogen undergoes two phase transitions, first to hexagonal and then to the cubic structure. The annealing atmosphere, temperature, and time allow adjustment of the density of copper vacancies and thus tuning of the charge carrier concentration and material transport properties. In this direction, the material annealed under Ar is characterized by higher electrical conductivities but lower Seebeck coefficients than the material annealed in the presence of hydrogen. By optimizing the charge carrier concentration through the annealing time, Cu2–xS with record figures of merit in the middle temperature range, up to 1.41 at 710 K, is obtained. We finally demonstrate that this strategy, based on a low-cost and scalable solution synthesis process, is also suitable for the production of high performance Cu2–xS layers using high throughput and cost-effective printing technologies.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.0c09866?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.0c09866</a>.Additional characterization data including TEM, HRTEM, SEM, XRD, DSC, ICP, thermoelectric properties, and literature comparison (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.0c09866/suppl_file/nn0c09866_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Morphology-dependent thermoelectric properties of mixed phases of copper sulfide (Cu2−xS) nanostructures synthesized by hydrothermal method

Effect of the Annealing Atmosphere on Crystal Phase and Thermoelectric Properties of Copper Sulfide

Multiscale architectures boosting thermoelectric performance of copper sulfide compound

Good Thermoelectric Performance and Stability in Copper Sulfide Synthesized by Hydrothermal Method and Densified by HP Technique

Enhanced thermoelectric properties of Cu1.8S via the introduction of ZnS nanostructures

Morphology and Phase Evolution from CuS to Cu1.8S in a Hydrothermal Process and Thermoelectric Properties of Cu1.8S Bulk

Phase Tuning for Enhancing the Thermoelectric Performance of Solution-Synthesized Cu 2– x S

Facile Synthesis of Monodisperse Cu3SbSe4 Nanoparticles and Thermoelectric Performance of Cu3SbSe4 Nanoparticle-Based Materials

Microstructure of Cu2S Nanoprecipitates and Its Effect on Electrical and Thermal Properties in Thermoelectric Cu2Zn0.2Sn0.8S3 Ceramics

Room temperature aqueous-based synthesis of copper-doped lead sulfide nanoparticles for thermoelectric application

Thermoelectric Performance of Hydrothermally Synthesized Micro/nano Cu2-xS

Excellent thermoelectric properties and stability realized in copper sulfides based composites via complex nanostructuring

Phase-Selective Synthesis and Self-Assembly of Monodisperse Copper Sulfide Nanocrystals

Study of Synthesis and Characterization of Pure Cus and Cufes Nanoparticles by Hydrothermal Method

Phase Composition Manipulation and Twin Boundary Engineering Lead to Enhanced Thermoelectric Performance of Cu 2 SnS 3

Enhanced Thermoelectric Performance of Hydrothermal Synthesized Ag Incorporated Cu &Lt;sub>2-X</sub>s Micro/Nano Composites

Synthesis and Phase Analysis of CuFeS2 Powders Prepared by Hydrothermal Method

Chalcopyrite CuFeS2: Solid-State Synthesis and Thermoelectric Properties

PbS–Pb–Cu x S Composites for Thermoelectric Application

Synergistically Optimized Electrical and Thermal Transport Properties in Copper Phthalocyanine-Based Organic Small Molecule with Nanoscale Phase Separations

Enhancing thermoelectric performance of Cu1.8S by Sb/Sn co-doping and incorporating multiscale defects to scatter heat-carrying phonons