Abstract:Cu2–xS has become one of the most promising thermoelectric materials for application in the middle-high temperature range. Its advantages include the abundance, low cost, and safety of its elements and a high performance at relatively elevated temperatures. However, stability issues limit its operation current and temperature, thus calling for the optimization of the material performance in the middle temperature range. Here, we present a synthetic protocol for large scale production of covellite CuS nanoparticles at ambient temperature and atmosphere, and using water as a solvent. The crystal phase and stoichiometry of the particles are afterward tuned through an annealing process at a moderate temperature under inert or reducing atmosphere. While annealing under argon results in Cu1.8S nanopowder with a rhombohedral crystal phase, annealing in an atmosphere containing hydrogen leads to tetragonal Cu1.96S. High temperature X-ray diffraction analysis shows the material annealed in argon to transform to the cubic phase at ca. 400 K, while the material annealed in the presence of hydrogen undergoes two phase transitions, first to hexagonal and then to the cubic structure. The annealing atmosphere, temperature, and time allow adjustment of the density of copper vacancies and thus tuning of the charge carrier concentration and material transport properties. In this direction, the material annealed under Ar is characterized by higher electrical conductivities but lower Seebeck coefficients than the material annealed in the presence of hydrogen. By optimizing the charge carrier concentration through the annealing time, Cu2–xS with record figures of merit in the middle temperature range, up to 1.41 at 710 K, is obtained. We finally demonstrate that this strategy, based on a low-cost and scalable solution synthesis process, is also suitable for the production of high performance Cu2–xS layers using high throughput and cost-effective printing technologies.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.0c09866?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.0c09866</a>.Additional characterization data including TEM, HRTEM, SEM, XRD, DSC, ICP, thermoelectric properties, and literature comparison (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.0c09866/suppl_file/nn0c09866_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Synthesis and Phase Analysis of CuFeS2 Powders Prepared by Hydrothermal Method

A solvothermal reaction route for the synthesis of CuFeS 2 ultrafine powder

A solvothermal reaction route for the synthesis of CuFeS<sub>2</sub> ultrafine powder

Hydrothermal Preparation of CuAlO2 Powder

A hydrothermal reaction to synthesize CuFeS2 nanorods

Single-Source Approach to Cubic FeS2 Crystallites and Their Optical and Electrochemical Properties

The synthesis and characterization of nanocrystalline Cu- and Ag-based multinary sulfide semiconductors

Phase Tuning for Enhancing the Thermoelectric Performance of Solution-Synthesized Cu 2– x S

Morphology-dependent thermoelectric properties of mixed phases of copper sulfide (Cu2−xS) nanostructures synthesized by hydrothermal method

The synthesis of CuFeSe2 through a solventothermal process

Morphology and Phase Evolution from CuS to Cu1.8S in a Hydrothermal Process and Thermoelectric Properties of Cu1.8S Bulk

Study of Synthesis and Characterization of Pure Cus and Cufes Nanoparticles by Hydrothermal Method

Preparation and Phase Transformation of Nanocrystalline Copper Sulfides (cu9s8, Cu7S4 and CuS) at Low Temperature

The Effect of the Sulfur Concentration on the Phase Transformation from the Mixed Cuo-Bi2o3 System to Cu3bis3 During the Sulfurization Process

Synthesis and Photocatalytic Performance of Copper Sulfide by a Simple Solvothermal Method

Preparation of Pyrite Powder by Hydrothermal Process

Effect of the Annealing Atmosphere on Crystal Phase and Thermoelectric Properties of Copper Sulfide

Synthesis of In<sub>2</sub>Se<sub>3</sub>/CuSe Composite Powder by Solvothermal Method

Synthesis of Cu2−xS electrocatalysts with different stoichiometric numbers by electrodeposition and heat posttreatment

Controllable hydrothermal synthesis of Cu2S nanowires on the copper substrate

The synthesis and morphological control of nanocrystalline pyrite nickel disulfide and cobalt disulfide