Abstract:NASICON-type Li1+xAlxTi2−x(PO4)3 (LATP) solid electrolytes have developed as a promising candidate for solid-state lithium batteries. However, the brittle and stiff LATP suffers from poor physical contact with electrodes and chemical/electrochemical instability at electrode|electrolyte interfaces. Herein, a thin and flexible hybrid electrolyte comprised of LATP and poly(vinylidene fluoride-trifluorethylene) (PVDF-TrFE) incorporated with highly concentrated ionic liquid electrolyte (ILE) is prepared to resolve these prominent limitations. To further protect the LATP|Li interface, an ultrathin poly[2,3-bis(2,2,6,6-tetramethylpiperidine-N-oxycarbonyl)-norbornene] (PTNB) polymer is coated on Li, acting as an additional protective layer. Consequently, the lithium stripping-plating lifetime is prolonged from 128 to 792 h, with no dendritic lithium observed. The PTNB@Li||LiNi0.8Co0.1Mn0.1O2 (PTNB@Li||NCM811) cells achieve significantly improved rate capability and cycling stability, predominantly resulting from the drastically decreased interfacial resistances, prohibited dendritic lithium generation, mitigated cathode material phase evolution, and prevention of internal microcrack formation. The thinner interphases formed on NCM811 and PTNB@Li electrodes also play a key role. The quasi-solid-state batteries allow for the fabrication of multi-layer bipolar cells with stable cycling. Even under some exertive circumstances, (limited lithium source, low temperature, e.g., 0 °C), the impressive electrochemical performance achieved highlights the importance of such quasi-solid-state lithium batteries as a viable solution for the next-generation high-performance lithium batteries.

Nano‐Scale Complexions Facilitate Li Dendrite‐Free Operation in LATP Solid‐State Electrolyte

All‐Solid‐State Batteries: Nano‐Scale Complexions Facilitate Li Dendrite‐Free Operation in LATP Solid‐State Electrolyte (Adv. Energy Mater. 26/2021)

Exploiting Nanoscale Complexion in LATP Solid-State Electrolyte via Interfacial Mg2+ Doping

Recent Advances in Li1+xAlxTi2−x(PO4)3 Solid-State Electrolyte for Safe Lithium Batteries

Chemomechanical Failure Mechanism Study in NASICON-Type Li1.3Al0.3Ti1.7(PO4)3 Solid-State Lithium Batteries

Interface engineering of Li<sub>1.3</sub>Al<sub>0.3</sub>Ti<sub>1.7</sub>(PO<sub>4</sub>)<sub>3</ sub> ceramic electrolyte via multifunctional interfacial layer for all-solid-state lithium batteries

Atomic-Resolution Electron Microscopy Unravelling the Role of Unusual Asymmetric Twin Boundaries in the Electron-Beam-Sensitive NASICON-Type Solid Electrolyte.

Construction of Polyvinylidene Fluoride Buffer Layers for Li1.3Al0.3Ti1.7(PO4)(3) Solid-State Electrolytes toward Stable Dendrite-Free Lithium Metal Batteries

Insights into the Enhanced Interfacial Stability Enabled by Electronic Conductor Layers in Solid‐State Li Batteries

Recent Advances of LATP and Their NASICON Structure As a Solid‐State Electrolyte for Lithium‐Ion Batteries

Highly Stable Quasi‐Solid‐State Lithium Metal Batteries: Reinforced Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 /Li Interface by a Protection Interlayer

Stabilizing the Interface of NASICON Solid Electrolyte Against Li Metal with Atomic Layer Deposition.

Stabilizing Li<sub>1.3</sub>Al<sub>0.3</sub>Ti<sub>1.7</sub>(PO<sub>4</sub>)<sub>3</ sub>|Li Metal Anode Interface in Solid-State Batteries by Kevlar Aramid Nanofiber-Based Protective Coating

Charge Carrier Dynamics of the Mixed Conducting Interphase in All‐Solid‐State Batteries: Lithiated Li1.3Al0.3Ti1.7(PO4)3 as a Case Study

3D Fiber-Network-Reinforced Bicontinuous Composite Solid Electrolyte for Dendrite-free Lithium Metal Batteries

Enabling High-Performance Hybrid Solid-State Batteries by Improving the Microstructure of Free-Standing LATP/LFP Composite Cathodes

Origin and regulation of interfacial instability for nickel-rich cathodes and NASICON-type Li1+xAlxTi2−x(PO4)3 solid electrolytes in solid-state lithium batteries

Roles of Lithium Aluminum Titanium Phosphate in Lithium Batteries

Modulating nano-inhomogeneity at electrode-solid electrolyte interfaces for dendrite-proof solid-state batteries and long-life memristors

Reconstruction of LATP-LT composite solid electrolyte and analysis of Li + conduction mechanism using 3D CT

Engineering and regulating the interfacial stability between Li1.3Al0.3Ti1.7(PO4)3-based solid electrolytes and lithium metal anodes for solid-state lithium batteries