Abstract:The fundamental mechanism of enhanced interfacial stability of Li/Li1.3Al0.3Ti1.7(PO4)3 enabled by the electronic conductor interlayers is revealed. Compared to the inhibition of electron injection by an ionic conductor layer, which is widely accepted as the key role for stabilizing interfaces, this work emphasizes that the electric field homogenization caused by an electronic conductor layer is of equal importance. The (electro)chemical reactions between Li1.3Al0.3Ti1.7(PO4)3 (LATP) solid‐state electrolyte and lithium metal plague the practical applications of LATP. A commonly used strategy to tackle this issue is to construct an ionic conductor layer to stabilize Li/LATP interface. Herein, it is demonstrated that an electronic conductor interlayer (Al or Ag) can also greatly enhance the interfacial stability of Li/LATP. To unveil the origin of the enhanced interfacial stability, a series of techniques, including in situ electron and optical microscopies, kelvin probe force microscopy, and finite element analysis, is exploited. Control experiments show clearly that Al layer can effectively homogenize the electric field distribution, which enables the uniform growth of interphases and thus prevents stress concentration and crack propagation. Moreover, when coupled with solid polymer electrolyte (SPE) to form Al‐SPE bilayer, it can effectively protect LATP from electron attack and interphase formation. Remarkably, Li symmetrical cells with an Al‐SPE bilayer exhibit superior stability of more than 5000 h at 0.2 mA cm−2, among the best cycling performances to date. This work presents an in‐depth understanding of the mechanism of the enhanced interfacial stability enabled by electronic conductor interlayers, as well as a universal interface architecture to boost the cyclability of solid‐state batteries.

Charge Carrier Dynamics of the Mixed Conducting Interphase in All‐Solid‐State Batteries: Lithiated Li1.3Al0.3Ti1.7(PO4)3 as a Case Study

High Li+ Conductivity of Li1.3+xAl0.3−xMgxTi1.7(PO4)3 with Hybrid Solid Electrolytes for Solid‐State Lithium Batteries

Exploring the Strain-Enhanced Li-Ion Migration in Li1.33Al0.33Ti1.67(PO4)3 Solid Electrolyte

Recent Advances in Li1+xAlxTi2−x(PO4)3 Solid-State Electrolyte for Safe Lithium Batteries

Characterization of the Lithium/Solid Electrolyte Interface in the Presence of Nanometer‐thin TiOx Layers for All‐Solid‐State Batteries

Insights into the Enhanced Interfacial Stability Enabled by Electronic Conductor Layers in Solid‐State Li Batteries

Enhanced Electrochemical Performance of Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 Solid Electrolyte by Anion Doping

Constructing Multifunctional Interphase between Li1.4Al0.4Ti1.6(PO4)(3) and Li Metal by Magnetron Sputtering for Highly Stable Solid-State Lithium Metal Batteries

Engineering and regulating the interfacial stability between Li1.3Al0.3Ti1.7(PO4)3-based solid electrolytes and lithium metal anodes for solid-state lithium batteries

Progress and Perspective of Li 1 + X Al X Ti 2 ‐x ( PO 4 ) 3 Ceramic Electrolyte in Lithium Batteries

Reconstruction of LATP-LT composite solid electrolyte and analysis of Li + conduction mechanism using 3D CT

Chemomechanical Failure Mechanism Study in NASICON-Type Li1.3Al0.3Ti1.7(PO4)3 Solid-State Lithium Batteries

Interface engineering of Li<sub>1.3</sub>Al<sub>0.3</sub>Ti<sub>1.7</sub>(PO<sub>4</sub>)<sub>3</ sub> ceramic electrolyte via multifunctional interfacial layer for all-solid-state lithium batteries

Effect of addition of LiAlSiO4 on microstructure, phase composition, and electrical properties of Li1.3Al0.3Ti1.7(PO4)3–based solid electrolyte

Insight into the Extreme Side Reaction between LiNi<sub>0.5</sub>Co<sub>0.2</sub>Mn<sub>0.3</sub>O<sub>2</sub> and Li<sub>1.3</sub>Al<sub>0.3</sub>Ti<sub>1.7</sub>(PO<sub>4</sub>)<sub>3</ sub> during Cosintering for All-Solid-State Batteries

Origin and regulation of interfacial instability for nickel-rich cathodes and NASICON-type Li1+xAlxTi2−x(PO4)3 solid electrolytes in solid-state lithium batteries

Preparation and electrochemical properties of a ceramic solid electrolyte with high ionic conductivity, Li1.3Al0.3Ti1.7(PO4)3

High-performance lithium metal batteries based on composite solid-state electrolytes with high ceramic content

Polycationic doping of the LATP ceramic electrolyte for Li-ion batteries

Li Dynamics in Mixed Ionic-Electronic Conducting Interlayer of All-Solid-State Li-metal Batteries

Interface Regulation Enabling Three-Dimensional Li1.3Al0.3Ti1.7(PO4)3-reinforced Composite Solid Electrolyte for High-Performance Lithium Batteries