Abstract:We developed a ReaxFF reactive force field for NASICON-type Li1+xAlxTi2-x(PO4)3 (LATP) materials, which is a promising solid-electrolyte that may enable all-solid-state lithium-ion batteries. The force field parameters were optimized based on density functional theory (DFT) data, including equations of state and the heats of formation of ternary metal oxides and metal phosphate crystal phases (e.g., LixTiO2, Al2TiO5, LiAlO2, AlPO4, Li3PO4 and LiTi2(PO4)3 (LTP)), and the energy barriers for Li diffusion in TiO2 and LTP via vacancies and interstitial sites. Using ReaxFF, the structural and the energetic features of LATP were described properly across various compositions - Li occupies more preferentially the interstitial site next to Al than next to Ti. Also, as observed in experimental data, the lattice parameters decrease when Ti is partly substituted by Al because of the smaller size of the Al cation. Using this force field, the diffusion mechanism and the ionic conductivity of Li in LTP and LATP were investigated at T = 300-1100 K. Low ionic conductivity (5.9 × 10-5 S cm-1 at 300 K) was obtained in LTP as previously reported. In LATP at x = 0.2, the ionic conductivity was slightly improved (8.4 × 10-5 S cm-1), but it is still below the experimental value, which is on the order of 10-4 to 10-3 S cm-1 at x = 0.3-0.5. At higher x (higher Al composition), LATP has a configurational diversity due to the Al substitution and the concomitant insertion of Li. By performing a hybrid MC/MD simulation for LATP at x = 0.5, a thermodynamically stable LATP configuration was obtained. The ionic conductivity of this LATP configuration was calculated to be 7.4 × 10-4 S cm-1 at 300 K, which is one order of magnitude higher than the ionic conductivity for LTP and LATP at x = 0.2. This value is in good agreement with our experimental value (2.5 × 10-4 S cm-1 at 300 K) and the literature values. The composition-dependent ionic conductivity of LATP was successfully demonstrated using the ReaxFF reactive force field, verifying the applicability of the LATP force field for the understanding of Li diffusion and the design of highly Li ion conductive solid electrolytes. Furthermore, our results also demonstrate the feasibility of the MC/MD method in modeling LATP configuration, and provide compelling evidence for the solid solution sensitivity on ionic conductivity.

Atomic-Resolution Electron Microscopy Unravelling the Role of Unusual Asymmetric Twin Boundaries in the Electron-Beam-Sensitive NASICON-Type Solid Electrolyte.

Microscopic Origin of the Ionic Transport Behaviors in Solid Electrolytes for Li Batteries

Atomic-scale origin of the large grain-boundary resistance in perovskite Li-ion-conducting solid electrolytes

Reconstruction of LATP-LT composite solid electrolyte and analysis of Li + conduction mechanism using 3D CT

Recent Advances in Li1+xAlxTi2−x(PO4)3 Solid-State Electrolyte for Safe Lithium Batteries

Recent Advances of LATP and Their NASICON Structure As a Solid‐State Electrolyte for Lithium‐Ion Batteries

Nano‐Scale Complexions Facilitate Li Dendrite‐Free Operation in LATP Solid‐State Electrolyte

Anomalous High Ionic Conductivity of Nanoporous Β-Li3ps4

Mesoscopic Framework Enables Facile Ionic Transport in Solid Electrolytes for Li Batteries

Progress and Perspective of Li 1 + X Al X Ti 2 ‐x ( PO 4 ) 3 Ceramic Electrolyte in Lithium Batteries

Stabilizing the Interface of NASICON Solid Electrolyte Against Li Metal with Atomic Layer Deposition.

Exploring the Strain-Enhanced Li-Ion Migration in Li1.33Al0.33Ti1.67(PO4)3 Solid Electrolyte

Solid Electrolytes: Fabrication of Sub‐Micrometer‐Thick Solid Electrolyte Membranes of β‐Li3PS4 via Tiled Assembly of Nanoscale, Plate‐Like Building Blocks (Adv. Energy Mater. 21/2018)

Development of a ReaxFF reactive force field for lithium ion conducting solid electrolyte Li1+xAlxTi2-x(PO4)3 (LATP)

Single-atom-layer Traps in a Solid Electrolyte for Lithium Batteries

Correlative electrochemical strain and scanning electron microscopy for local characterization of the solid state electrolyte Li1.3Al0.3Ti1.7(PO4)3

Exploiting Nanoscale Complexion in LATP Solid-State Electrolyte via Interfacial Mg2+ Doping

Synergistic Effect of Calcination and Sintering on the Reduction of Grain Boundary Resistance of LATP Solid Electrolyte

Insight into the Microstructure and Ionic Conductivity of Cold Sintered NASICON Solid Electrolyte for Solid-State Batteries

Spatially Resolved Electrochemical Strain of Solid‐State Electrolytes via High Resolution Sequential Excitation and Its Implication on Grain Boundary Impedance

Atomic-scale study clarifying the role of space-charge layers in a Li-ion-conducting solid electrolyte