Abstract:This study aimed to develop a finite element model to simulate the geogrid-reinforced flexible pavement structure by taking into account the lateral confinement effect of geogrid layer, the interaction between geogrid and aggregate/soil, and the nonlinear cross-anisotropy of geogrid-reinforced unbound granular material (UGM). First, an analytical model was proposed to quantify the effect of the lateral confinement of geogrid layer on the resilient modulus of UGM. By comparing to the laboratory triaxial test results, the developed analytical model was proven to accurately predict the resilient modulus of geogrid-reinforced UGM. Second, the Goodman interface element model was used to characterize the contact behavior of geogrid-aggregate/soil interface. In order to simulate the nonlinear cross-anisotropic behavior of geogrid-reinforced UGM, a user-defined material (UMAT) subroutine was programmed using the secant modulus approach. The accuracy of the developed UMAT was verified by comparing the numerical simulation results to the analytical solutions in a virtual triaxial test.Two pairs of geogrid-reinforced and unreinforced pavement models were analyzed in this study. It was found that the geogrid reinforcement is effective in mitigating the rutting damage of base course and subgrade, but cannot significantly extend the fatigue life of flexible pavement. The geogrid reinforced in the middle of the base course is better at reducing the rutting damage of base course than that placed at the base/subgrade interface. However, the geogrid reinforcement is much more effective in reducing the rutting damage of the subgrade when it is placed at the bottom of the base course. A comprehensive large-scale tank (LST) testing program was designed to record the critical pavement responses, including the surface deflection, the tensile strain at the bottom of the asphalt concrete, and the vertical stresses in base course and subgrade. The developed geogrid-reinforced and unreinforced finite element models were finally validated by comparing the model predictions with those measurements from the LST test.

Large‐scale field testing of geotechnical seismic isolation of structures using gravel‐rubber mixtures

Field testing of gravel-rubber mixtures as geotechnical seismic isolation

Configuration of a gravel-rubber geotechnical seismic isolation system from laboratory and field tests

Geotechnical Seismic Isolation System Based on Rubber-Sand Mixtures for Rural Residence Buildings: Shaking Table Test

Shaking table experiments on framed structure resting on geogrid reinforced geotechnical seismic isolation system

Numerical Modeling of Geogrid-Reinforced Flexible Pavement and Corresponding Validation Using Large-Scale Tank Test

Energy Dissipation Efficiency of Geotechnical Seismic Isolation with Gravel-Rubber Mixtures: Insights from FE Non-Linear Numerical Analysis

Geotechnical seismic isolation based on high-damping polyurethane: centrifuge modelling

Rubber-sand infilled soilbags as seismic isolation cushions: experimental validation

Dynamic Calibration of the Transverse Elastic Modulus of Shredded Rubber for Use in Seismic Isolation

Sustainable application of waste tire chips and geogrid for improving load carrying capacity of granular soils

Experimental Investigation of Geosynthetic-Reinforced Pile-Supported Composite Foundations under Cyclic Loading

Hybrid geotechnical and structural seismic isolation: Shake table tests

Recycling of End-of-Life Tires (ELTs) for Sustainable Geotechnical Applications: A New Zealand Perspective

Laboratory Experimental Study on GESC Combined with Electroosmosis for Ground Improvement

Comparative Study on the Reinforced Sand-Bed and the Stone Column in Improving the Clay Deposit Supporting Isolated Footing

Analytical design models for geotechnical seismic isolation systems

Substitute Building Materials in Geogrid-Reinforced Soil Structures

Large-scale experimental investigation of a low-cost PVC ‘sand-wich’ (PVC-s) seismic isolation for developing countries

Liquefaction mitigation using sodium polyacrylate: Large-scale in-situ applications with a unique grouting apparatus