Abstract:The higher efficiency of superconducting radio-frequency (SRF) cavities compared to normal-conducting ones enables the development of high-energy continuous-wave linear accelerators (linacs). Recent progress in the development of high-quality Nb$_3$Sn film coatings along with the availability of cryocoolers with high cooling capacity at 4 K makes it feasible to operate SRF cavities cooled by thermal conduction at relevant accelerating gradients for use in accelerators. A possible use of conduction-cooled SRF linacs is for environmental applications, requiring electron beams with energy of $1 - 10$ MeV and 1 MW of power. We have designed a 915 MHz SRF linac for such an application and developed a prototype single-cell cavity to prove the proposed design by operating it with cryocoolers at the accelerating gradient required for 1 MeV energy gain. The cavity has a $\sim 3$ $\mu$m thick Nb$_3$Sn film on the inner surface, deposited on a $\sim4$ mm thick bulk Nb substrate and a bulk $\sim7$ mm thick Cu outer shell with three Cu attachment tabs. The cavity was tested up to a peak surface magnetic field of 53 mT in liquid He at 4.3 K. A horizontal test cryostat was designed and built to test the cavity cooled with three Gifford-McMahon cryocoolers. The rf tests of the conduction-cooled cavity, performed at General Atomics, achieved a peak surface magnetic field of 50 mT and stable operation was possible with up to 18.5 W of rf heat load. The peak frequency shift due to microphonics was 23 Hz. These results represent the highest peak surface magnetic field achieved in a conduction-cooled SRF cavity to date and meet the requirements for a 1 MeV energy gain.

Thermal Design and Test Results of the Superconducting Magnet for a Compact Heavy-Ion Synchrotron

Design and Magnetic Field Measurement of the Superconducting Magnets for the Next-Generation Rotating Gantry

Design and Test of Superconducting Magnet for 200 MeV Proton Cyclotron

Conceptual Design of a 5 T 200 Mm 1 T/s Ramping NbTi Synchrotron Magnet for Cancer Treatment

AC loss and thermal analysis of a curved DCT super-conducting magnet for carbon ion therapy

Study on Forced Flow Cooling of Superconducting Magnet for Compact Synchrotron

Quench Safety Simulation and Verification of Superconducting Coils for the SC200 Superconducting Cyclotron

Commissioning, Performance, and Effect of the Quench Current-boosting Device on a Dedicated Superconducting Magnet

Design and Construction of the Main Magnet for a 230-MeV Superconducting Cyclotron

A Carbon-Ion Superconducting Gantry and a Synchrotron Based on Canted Cosine Theta Magnets

Design of Adjustable Homogeneous Region Cryofree Conduction-Cooled Superconducting Magnet for Gyrotron

Electromagnetic, stress and thermal analysis of the Superconducting Magnet

High Magnetic Field Superconducting Magnet with Zero Helium Boil-Off for Nuclear Magnetic Resonance Spectrometer

Design and Testing of a Gas-Helium Conduction Cooled REBCO Magnet for a 300 kvar HTS Synchronous Condenser Prototype

Development of a 1/2-length prototype high field Nb3Sn magnet for the 4th generation ECR ion source

Structural design and test of superconducting magnet coil for the cooling storage ring external-target experiment

Design and Testing of a Prototype Canted-Cosine-Theta HTS Dipole Magnet Using CORC Cable

High Temperature Superconducting Magnet for Fast Discharging Experiments

From Nuclotron Synchrotron to NICA Collider– Common Cryogenic Concept for Various Superconducting Magnets, their Design Specifics and Test Results

Development of a prototype superconducting radio-frequency cavity for conduction-cooled accelerators

High Magnetic Field Superconducting Magnet for 400 MHz Nuclear Magnetic Resonance Spectrometer