Abstract:Repair is a critical step in restoring end-of-life components into their original shape or new functionality that contributes to sustainability for society. One of the advanced technologies to repair is the laser cladding process, which is an additive manufacturing technique for restoring metal component surfaces, e.g., a cylindrical shaft or downhole tools. Repairing surface damage has been challenging for several reasons, including the complexity of the path planning process. According to the literature, many researchers have focused on an automatic generation of the toolpath for laser cladding; however, most studies were developed for model building rather than repair. Thus, a general wear rebuild method is required for various types and shapes of damage. In addition, the development of a robust and effective method is feasible. This paper proposes a method to generate laser tool paths for surface damage based on a layer-by-layer rebuild approach. With reverse engineering techniques, acquired spatial measurements of the damaged surface, using a depth sensor, are employed to reconstruct the surface topology using the Delaunay method. Further, a surface unwrapping process is applied for the reconstructed mesh. Then, a new surface mesh slicing technique is developed to obtain rebuilding slices. This allows for independent path planning per layer. A unique feature of this method is the ability to control clad orientation per layer, which allows for a cross-hatching pattern path. In addition, processing normal vectors are computed to enable surface following cladding process with a minimal change in the tool's orientation and movement. Furthermore, the proposed method was tested with three practical case studies, which resulted in an effective toolpath. Lastly, the generated paths are verified in a simulated environment before producing the robot program. In the future, a practical repair process will be carried out to further investigate the effectiveness of this method and perform a metallurgical study of the clad.

Smooth path generation method of laser cladding bit repair robot based on 3D automatic measurement of wear surface point cloud

Worn area modeling for automating the repair of turbine blades

Mixed Tiny Path Smoothing Method Based on Sliding Convolution Windows for CNC Machining

BROKEN AREA MODELING FOR REPAIR AUTOMATION

Algorithm of Real-Time Path Generation for Ultrasonic Inspection of Sculptured Surface

Study on Path Generation Method of Curved Surface Part for Ultrasonic Inspection

Laser cladding path planning for gear repair based on area division and trajectory correction

Laser Cladding Path Planning for Curved Metal Parts

3D curvature grinding path planning based on point cloud data

A path planning method for surface damage repair using a robot-assisted laser cladding process

An algorithm for trajectory planning of complex surface parts for laser cladding remanufacturing

An Adaptive Slicing Algorithm for Laser Cladding Remanufacturing of Complex Components

Point cloud 3D parent surface reconstruction and weld seam feature extraction for robotic grinding path planning

Development of Integrated Automatic System of Laser Cladding for Repairing of Polycrystalline Diamond Compact Bits

Robotic Trajectory Planning for Non-Destructive Testing Based on Surface 3D Point Cloud Data

Hole Surface Repairing for Laser Triangular Mesh Point Cloud

A novel feature-guided trajectory generation method based on point cloud for robotic grinding of freeform welds

Repair of Defective 3D Blade Model Based on Deformation of Adjacent Non-Defective Cross-Sectional Curve

Process Information Transferring for Cutting Paths in Laser Manufacturing

A novel path planning method of robotic grinding for free-form weld seam based on 3D point cloud

Smoothness Optimization Based on Measured 3D Point Cloud in Robotic Drilling