Abstract:Aeroengine turbine seals made of nickel -based superalloys are expensive to manufacture, hence remanufacturing of such parts has significant economic justification. However, the deformation of the workpiece due to high -temperature service leads to poor consistency of the sealing parts, making it challenging to carry out a uniform machining method to remove the worn honeycomb structures. Consequently, inefficient and laborious manual grinding is still employed to accomplish the repairs. Aiming to address the challenge, this paper proposes a vision -based closed -loop robotic fine grinding method. The method utilizes a 3D camera to reconstruct the workpiece and create a coarse grinding trajectory to swiftly remove the honeycomb structure from turbine seals. Subsequently, it transitions to the closed -loop fine grinding stage. Firstly, an image segmentation method based on Gabor Wavelet Transform (GWT) and K -Means identifies areas requiring fine grinding. Secondly, the linear relationship between GWT frequency domain and image space domain is used to establish an angle deviation estimation model to complete the pose correction of the robot grinding trajectory. Finally, a closed -loop force/position control fine grinding method is achieved, with the aid of a six -dimensional force sensor. This method has been verified to be effective through grinding experiments on turbine seals. The removal amount of honeycomb structures exceeds 98 % and overcut into the substrate does not exceed 0.1 mm. The ground surface has a roughness of Ra 2.2 mu m and the efficiency is increased by more than 50 %. Based on the superior performance, it is concluded that the proposed robotic fine grinding method can be deployed to automate the remanufacturing process.

Vision-guided path planning and joint configuration optimization for robot grinding of spatial surface weld beads via point cloud

A novel path planning method of robotic grinding for free-form weld seam based on 3D point cloud

A novel feature-guided trajectory generation method based on point cloud for robotic grinding of freeform welds

Point cloud 3D parent surface reconstruction and weld seam feature extraction for robotic grinding path planning

Automatic Aluminum Alloy Surface Grinding Trajectory Planning of Industrial Robot Based on Weld Seam Recognition and Positioning

Pose Optimization and Tool Path Planning for Robotic Grinding of Complicated Curved Surface

A Path Planning Method of Robotic Belt Grinding for Workpieces With Complex Surfaces

An Approach to the Path Planning of Tube–sphere Intersection Welds with the Robot Dedicated to J-groove Joints

Trajectory Planning and Optimization for Robotic Machining Based On Measured Point Cloud

Point Cloud-Based Model-Free Path Planning Method of Robotic Grinding for Large Complex Forged Parts

3D curvature grinding path planning based on point cloud data

Automatic Generation of Interference-Free and Posture-Smooth Toolpath for Robotic Belt Grinding of Complex Workpieces

Robotic Grinding Process Planning for Complex Blade Surfaces

Vision-based Closed-Loop Robotic Fine Grinding of Aeroengine Turbine Seals Utilizing Gabor Wavelet Transform

Feature extraction and robot path planning method in 3D vision-guided welding for multi-blade wheel structures

Spatial Path Planning for Robotic Milling of Automotive Casting Components Based on Optimal Machining Posture

Sensor Calibration and Trajectory Planning in 3d Vision-guided Robots

Research on complex surface grinding path planning of grinding robot based on NX and Tecnomatix

Time-varying Isobaric Surface Reconstruction and Path Planning for Robotic Grinding of Weak-Stiffness Workpieces

Pose and Path Planning for Industrial Robot Surface Machining Based on Direction Fields