Abstract:Robots with openness and flexibility have attracted a large number of researchers to conduct in-depth studies in the field of surface machining. However, there is a redundant degree of freedom (DOF) in 6-DOF robot machining: when a ball end milling cutter is used to process curved parts, the tool point needs to strictly follow the planned milling trajectory, but the tool axis vector only needs to be within a certain range. During the machining process, the rotation of the tool around its axis is not constrained. Therefore, it is necessary to optimize the redundant DOF. Aiming at the redundant DOF of the tool axis vector in ball end milling for surface parts, a Redundancy Optimization strategy for Minimum Joint trajectory (ROMJ) is proposed. It takes the shortest trajectory of robot joints as the optimization objective, and the numerical optimization method is adopted to carry out the optimal design of tool axis vector trajectory in the milling process. Before optimization, to decrease the data volume, the number of track points is sampled and adjusted based on curve characterization errors. In the optimization process, considering the obvious difference in the load quality characteristics of the robot joints, a Redundancy Optimization strategy for Minimum Joint trajectory considering the different Load of joints (ROMJ-L) is proposed. The load difference coefficients of each joint are introduced into the optimization objective of the trajectory of robot joints. By using this method, the optimal design of each joint trajectory of the robot is realized. In order to verify the methods proposed in this paper, a comparison experiment is carried out. The results show that under the same tool point trajectory, the proposed methods can significantly reduce the robot joint trajectory, and the joint trajectory is influenced by the load difference of each joint. Finally, an Eflin-10 robot is used to process the butterfly trajectory tool path by the trajectory planned by the ROMJ-L method, and the results show that the method is practical.

Joint-smooth Toolpath Planning by Optimized Differential Vector for Robot Surface Machining Considering the Tool Orientation Constraints

Smoothness-oriented path optimization for robotic milling processes

Trajectory Planning and Optimization for Robotic Machining Based On Measured Point Cloud

Ball-End Cutting Tool Posture Optimization for Robot Surface Milling Considering Different Joint Load

Axis path planning of five-axis surface machining by optimizing differential vector of the axis movement considering tool posture limits

Tool orientation and redundancy integrated planning method constrained by stiffness for robotic machining of freeform surfaces

An Analytical Tool Path Smoothing Algorithm for Robotic Machining with the Consideration of Redundant Kinematics

A Symmetrical Arrangement Strategy Based Real-Time Toolpath Planning Method for a 5-Dof Fully Parallel Machining Robot

Kinematics Performance Oriented Smoothing Method to Plan Tool Orientations for 5-Axis Ball-End CNC Machining

Toolpath Smoothing with Reduced Curvature and Synchronized Motion for Hybrid Robots

Tool Orientation Sequence Smoothing Method Based on the Discrete Domain of Feasible Orientations

Pose Optimization and Tool Path Planning for Robotic Grinding of Complicated Curved Surface

Toolpath Generation for Robotic Flank Milling Via Smoothness and Stiffness Optimization.

Pose and Path Planning for Industrial Robot Surface Machining Based on Direction Fields

Toward Optimal Robot Machining Considering the Workpiece Surface Geometry in a Task-Oriented Approach

Kinematic Performance-Oriented Tool Orientation Optimization for a Hybrid Machining Robot in Five-Axis Ball-End Milling

Research on Configuration Design Optimization and Trajectory Planning of Manipulators for Precision Machining and Inspection of Large-Curvature and Large-Area Curved Surfaces

A C3 Continuous Toolpath Corner Smoothing Method for a Hybrid Machining Robot

Posture Optimization in Robotic Flat-End Milling Based on Sequential Quadratic Programming

Tool orientation planning for five-axis CNC machining of open free-form surfaces

Tool path generation for 5-axis flank milling of ruled surfaces with optimal cutter locations considering multiple geometric constraints