Abstract:In this article, an innovative manufacturing system based on a dual-arm robot, each arm with five degree-of-freedom (DOF), is proposed. Although the proposed system can work in the automation mode or machining mode, only the function of machining is studied here. In this case, the system is equivalent to a five-axis machine tool. The method of equivalent errors is employed to design a robust contouring controller. It is shown that reducing the equivalent contour error in the joint space is equivalent to reducing both position contour error and tool orientation error in the task space. As a comparison, a conventional distributed controller is also designed. Several cases of experiments have been conducted, including a circular path with four different feedrates and an elliptic path. The experimental results show that the proposed method can achieve much better results in all cases, and demonstrate the feasibility of adopting the dual-arm robotic system for machining task. Note to Practitioners—This article was motivated by the traditional manufacturing system that is a cooperation between computer numerical controlled (CNC) machine tool(s) and robot arm(s). This article proposes a novel usage of a dual-arm robot with a fixed spindle and cutting tool in order to integrate the main functions of the CNC machine and robot arm together. This system alone can perform machining and automation tasks, which can significantly reduce the overall cost of a manufacturing system. The existing dual-arm robots have seldom been designed to perform machining tasks. For machining, a contouring controller is necessary and is proposed in this article. This model-based contouring controller relies on the accurate system parameters to achieve high precision machining. For example, the mass and inertia changes of a workpiece during machining should be considered. This issue will be addressed in our future research.

Toward Optimal Robot Machining Considering the Workpiece Surface Geometry in a Task-Oriented Approach

Task-Oriented Evaluation of the Feasible Kinematic Directional Capabilities for Robot Machining

Stiffness-oriented Posture Optimization in Robotic Machining Applications

Optimal Task-Space Tracking with Minimum Manipulator Reconfiguration

Joint-smooth Toolpath Planning by Optimized Differential Vector for Robot Surface Machining Considering the Tool Orientation Constraints

Trajectory Planning and Optimization for Robotic Machining Based On Measured Point Cloud

Dexterous Workspace Analysis of Industrial Robot for Machining Based on Service Sphere

Workpiece Placement Optimization of Six-Revolute Industrial Serial Robots for Machining Operations

Maximally manipulable vision-based motion planning for robotic rough-cutting on arbitrarily shaped surfaces

Task-dependent workpiece placement optimization for minimizing contour errors induced by the low posture-dependent stiffness of robotic milling

Research on Configuration Design Optimization and Trajectory Planning of Manipulators for Precision Machining and Inspection of Large-Curvature and Large-Area Curved Surfaces

Optimal robot task scheduling in cluttered environments considering mechanical advantage

Smoothness-oriented path optimization for robotic milling processes

Accuracy improvement of robotic machining based on robot’s structural properties

Generation of a Robot Program and Determination of an Optimal Workpiece Placement Considering the Manipulability of Industrial Robots

Design Optimizer for Planar Soft-Growing Robot Manipulators

Uncertainty-aware error modeling and hierarchical redundancy optimization for robotic surface machining

Contouring Control of an Innovative Manufacturing System Based on Dual-Arm Robot

Tool orientation and redundancy integrated planning method constrained by stiffness for robotic machining of freeform surfaces

Human-robot cooperation for robust surface treatment using non-conventional sliding mode control

Conceptual Design and Kinematic Optimization of a Gantry Hybrid Machining Robot