Abstract:Repair is a critical step in restoring end-of-life components into their original shape or new functionality that contributes to sustainability for society. One of the advanced technologies to repair is the laser cladding process, which is an additive manufacturing technique for restoring metal component surfaces, e.g., a cylindrical shaft or downhole tools. Repairing surface damage has been challenging for several reasons, including the complexity of the path planning process. According to the literature, many researchers have focused on an automatic generation of the toolpath for laser cladding; however, most studies were developed for model building rather than repair. Thus, a general wear rebuild method is required for various types and shapes of damage. In addition, the development of a robust and effective method is feasible. This paper proposes a method to generate laser tool paths for surface damage based on a layer-by-layer rebuild approach. With reverse engineering techniques, acquired spatial measurements of the damaged surface, using a depth sensor, are employed to reconstruct the surface topology using the Delaunay method. Further, a surface unwrapping process is applied for the reconstructed mesh. Then, a new surface mesh slicing technique is developed to obtain rebuilding slices. This allows for independent path planning per layer. A unique feature of this method is the ability to control clad orientation per layer, which allows for a cross-hatching pattern path. In addition, processing normal vectors are computed to enable surface following cladding process with a minimal change in the tool's orientation and movement. Furthermore, the proposed method was tested with three practical case studies, which resulted in an effective toolpath. Lastly, the generated paths are verified in a simulated environment before producing the robot program. In the future, a practical repair process will be carried out to further investigate the effectiveness of this method and perform a metallurgical study of the clad.

A path planning method for surface damage repair using a robot-assisted laser cladding process

Worn area modeling for automating the repair of turbine blades

Vision-based spatial damage localization method for autonomous robotic laser cladding repair processes

BROKEN AREA MODELING FOR REPAIR AUTOMATION

Laser cladding path planning for gear repair based on area division and trajectory correction

An Adaptive Slicing Algorithm for Laser Cladding Remanufacturing of Complex Components

Development of Integrated Automatic System of Laser Cladding for Repairing of Polycrystalline Diamond Compact Bits

Finite Element Numerical Simulation and Repair Process of Laser Cladding Repair of Surface Cracks on Mechanical Parts

An algorithm for trajectory planning of complex surface parts for laser cladding remanufacturing

Laser Cladding Path Planning for Curved Metal Parts

The application of laser cladding technology in mechanical repair work

Smooth path generation method of laser cladding bit repair robot based on 3D automatic measurement of wear surface point cloud

Research on hybrid remanufacturing process chain of laser cladding, CNC machining and ultrasonic rolling for aero-engine blades

In situ repairing of continuous fiber-reinforced thermoplastic composite via multi-axial additive manufacturing

Application of a New Alloy and Post Processing Procedures for Laser Cladding Repairs on Hypereutectoid Rail Components

Achieving Low-Porosity AlSi10Mg Cladding Layers for the Additive Repair of Aluminum Alloy Parts by Directed Energy Deposition

Impact of Ultrasonic Surface Rolling Processes on Microstructures and Fatigue Properties of 300M Steel Laser-Cladding-Repaired Components

Basic Experimental Researches On Repairing Technology of Laser Cladding

Tribological Properties of Laser Cladded Alloys for Repair of Rail Components

Remanufacturing Shaping System Based on Pulsed Plasma Arc Welding

Preliminary Experimental Study of Laser Cladding Repair on Directionally Solidified Blades