Abstract:Repair is a critical step in restoring end-of-life components into their original shape or new functionality that contributes to sustainability for society. One of the advanced technologies to repair is the laser cladding process, which is an additive manufacturing technique for restoring metal component surfaces, e.g., a cylindrical shaft or downhole tools. Repairing surface damage has been challenging for several reasons, including the complexity of the path planning process. According to the literature, many researchers have focused on an automatic generation of the toolpath for laser cladding; however, most studies were developed for model building rather than repair. Thus, a general wear rebuild method is required for various types and shapes of damage. In addition, the development of a robust and effective method is feasible. This paper proposes a method to generate laser tool paths for surface damage based on a layer-by-layer rebuild approach. With reverse engineering techniques, acquired spatial measurements of the damaged surface, using a depth sensor, are employed to reconstruct the surface topology using the Delaunay method. Further, a surface unwrapping process is applied for the reconstructed mesh. Then, a new surface mesh slicing technique is developed to obtain rebuilding slices. This allows for independent path planning per layer. A unique feature of this method is the ability to control clad orientation per layer, which allows for a cross-hatching pattern path. In addition, processing normal vectors are computed to enable surface following cladding process with a minimal change in the tool's orientation and movement. Furthermore, the proposed method was tested with three practical case studies, which resulted in an effective toolpath. Lastly, the generated paths are verified in a simulated environment before producing the robot program. In the future, a practical repair process will be carried out to further investigate the effectiveness of this method and perform a metallurgical study of the clad.

Remanufacturing Shaping System Based on Pulsed Plasma Arc Welding

Worn area modeling for automating the repair of turbine blades

BROKEN AREA MODELING FOR REPAIR AUTOMATION

Research on rapid repairing techniques for auto panel dies

Rapid Digital Repair Technique for Auto Panel Dies

Automated generation of robot MAG surfacing path for remanufacturing system

A Hybrid Process Integrating Reverse Engineering, Pre-Repair Processing, Additive Manufacturing, and Material Testing for Component Remanufacturing

Equal–Additive–Subtractive Remanufacturing Integrated Laser Directed Energy Deposition with Shot Peening and Machining Induced High Performance of Plunger Rod

Remanufacturing Scheme Design for Used Parts Based on Incomplete Information Reconstruction

Key Technologies and Research Progress in Robotic Arc Additive Remanufacturing

Advanced Additive Remanufacturing Technology

Algorithm for remanufacturing of damaged parts with hybrid 3D printing and machining process

Weld-seam identification and model reconstruction of remanufacturing blade based on three-dimensional vision

Wire and arc additive remanufacturing of hot-forging dies: a preliminary study

Research on hybrid remanufacturing process chain of laser cladding, CNC machining and ultrasonic rolling for aero-engine blades

A path planning method for surface damage repair using a robot-assisted laser cladding process

Hybrid Additive and Subtractive Manufacturing Method Using Pulsed Arc Plasma

A path generation method for wire and arc additive remanufacturing of complex hot forging dies

Remanufacturing of Low-Carbon Steel Components using WAAM: Microstructural, Mechanical, and Parametric Analysis

Model-enabled robotic machining framework for repairing paint film defects

Investigation on repairing 30CrMnSiNi2A steel with laser additive and subtractive hybrid remanufacturing technology