Abstract:A non-iterative method is proposed to evaluate surface tension and contact angle simultaneously from a sessile drop observation in gravity using two universal figures. A theory of the sessile drop in gravity is used assuming an axisymmetric profile of the drop. Numerical calculation is carried out to prepare the two figures. The first one of the figures is a relation between the normalized curvature at the top of the drop and the geometry ratio of height to radius of a point on the drop surface. The second one of the figures is a relation between the normalized curvature and the normalized height of the point. The position and the tangential angle of the point on the drop surface are obtained from the sessile drop observation. Using the first figure, the normalized curvature can be determined from the position and the tangential angle of the point. Using the second figure, the normalized height of the point can be determined from the normalized curvature determined. Since the height and the normalized heights can be obtained from the measurement, the normalizing factor can be obtained. Because the factor is a function of the gravity and the surface tension of the liquid, we can evaluate the surface tension of the liquid from the point on the sessile drop surface. By taking average using several points, we can improve accuracy of the surface tension evaluated. Also, the first figure can be used to evaluate the contact angle from the position of the drop edge without measurement of angle. The present method is demonstrated using a pure water droplet on a water-repellent surface. It shows a successful evaluation of the surface tension and the contact angle, simultaneously from the droplet observation, without any iterative calculation.

The computation of surface tension and of contact angle by the sessile-drop method

Reliable determination of contact angle from the height and volume of sessile drops

Simple relations for wettability of a droplet on a low-surface-energy solid

A non-iterative method to evaluate surface tension and contact angle simultaneously by a sessile drop in gravity using universal figures

Measuring surface tensions of soft solids with huge contact-angle hysteresis

Discussion on a Mechanical Equilibrium Condition of a Sessile Drop on a Smooth Solid Surface

Estimating Critical Surface Tension from Droplet Spreading Area

STUDY ON A MECHANICAL EQUILIBRIUM CONDITION AT A THREE-PHASE CONTACT LINE: WETTABILITY ON SOLID SURFACES

CONTACT ANGLE VARIATION IN WATER DROPLETS ON LOW-SURFACE-ENERGY SOLIDS

J0230203 Analytical consideration of droplet wettability on solid surfaces

Computerized device with CCD camera for measurement of surface tension and wetting angle in solid-liquid systems

Apparent Contact Angle and Contact Angle Hysteresis on Liquid Infused Surfaces

Experimental investigation on variations in geometric variables of a droplet on a low-surface-energy solid

EFFECT OF SOLID SURFACE PROPERTY ON GEOMETRIC VARIATIONS OF MICRO- TO MILLIMETER-SIZED WATER DROPLETS DURING VOLUME REDUCTION PROCESS

Line tension from dual-geometry sessile droplet measurements: Combining contact angle size dependence data for axisymmetric and cylindrical droplets to determine the line tension

An analytical approach for determining contact angle hysteresis on smooth, micropillared, and micropored homogeneous surfaces

Surface tensiometry of phase separated protein and polymer droplets by the sessile drop method

Proposal and applicability of a method to evaluate surface tension of liquid using large volume sessile drop in gravity

Droplet surface tension calculation method based on contour fitting

Axisymmetric Drop Shape Analysis: Computational Methods for the Measurement of Interfacial Properties from the Shape and Dimensions of Pendant and Sessile Drops.

Numerical and Experimental Investigation of Static Wetting Morphologies of Aqueous Drops on Lubricated Slippery Surfaces Using a Quasi-Static Approach