Abstract:A non-iterative method is proposed to evaluate surface tension and contact angle simultaneously from a sessile drop observation in gravity using two universal figures. A theory of the sessile drop in gravity is used assuming an axisymmetric profile of the drop. Numerical calculation is carried out to prepare the two figures. The first one of the figures is a relation between the normalized curvature at the top of the drop and the geometry ratio of height to radius of a point on the drop surface. The second one of the figures is a relation between the normalized curvature and the normalized height of the point. The position and the tangential angle of the point on the drop surface are obtained from the sessile drop observation. Using the first figure, the normalized curvature can be determined from the position and the tangential angle of the point. Using the second figure, the normalized height of the point can be determined from the normalized curvature determined. Since the height and the normalized heights can be obtained from the measurement, the normalizing factor can be obtained. Because the factor is a function of the gravity and the surface tension of the liquid, we can evaluate the surface tension of the liquid from the point on the sessile drop surface. By taking average using several points, we can improve accuracy of the surface tension evaluated. Also, the first figure can be used to evaluate the contact angle from the position of the drop edge without measurement of angle. The present method is demonstrated using a pure water droplet on a water-repellent surface. It shows a successful evaluation of the surface tension and the contact angle, simultaneously from the droplet observation, without any iterative calculation.

Estimating Critical Surface Tension from Droplet Spreading Area

Simple relations for wettability of a droplet on a low-surface-energy solid

Research Progress on Calculation of Solid Surface Tension Based on Young′s Equation

J0230203 Analytical consideration of droplet wettability on solid surfaces

Measure liquid surface tension by fitting lying droplet profile

Experimental Correlation for Splashing Condition of Droplets on Solid Substrates

Wettability Model for Various-Sized Droplets on Solid Surfaces

Universality of Droplet Impingement: Low-to-High Viscosities and Surface Tensions

Analytical Consideration of Liquid Droplet Impingement on Solid Surfaces

Error Analysis and Specialty Research of Application of Capillary Method in Measurement of Liquid Surface Tension

A non-iterative method to evaluate surface tension and contact angle simultaneously by a sessile drop in gravity using universal figures

EFFECT OF SOLID SURFACE PROPERTY ON GEOMETRIC VARIATIONS OF MICRO- TO MILLIMETER-SIZED WATER DROPLETS DURING VOLUME REDUCTION PROCESS

Experimental investigation on variations in geometric variables of a droplet on a low-surface-energy solid

CONTACT ANGLE VARIATION IN WATER DROPLETS ON LOW-SURFACE-ENERGY SOLIDS

A New Criterion for the Splashing of a Droplet on Dry Surface from High-Fidelity Simulations

Proposal and applicability of a method to evaluate surface tension of liquid using large volume sessile drop in gravity

STUDY ON A MECHANICAL EQUILIBRIUM CONDITION AT A THREE-PHASE CONTACT LINE: WETTABILITY ON SOLID SURFACES

Method to Measure Surface Tension of Microdroplets Using Standard AFM Cantilever Tips

Experimental and Theoretical Investigation of Contact-Angle Variation for Water–ethanol Mixture Droplets on a Low-Surface-energy Solid

Measurement of Liquid Surface Tension by Fitting the Lying Droplet Profile

STATIC SPREADING OF DROPLET IMPACT ON SOLID SURFACE: INFLUENCE FACTOR