Abstract:A comparative numerical study has been conducted on the heat transfer characteristics of an array of jet impingement on a flat plate and plates roughened with inline/staggered square pin-fins with the spent air in one direction. Additional experiments were also conducted using one flat plate and one pin-fin roughened plate to validate the computation models. The comparisons between the experimental and numerical data showed that the numerical computation model can reasonably well predict the heat transfer and pressure loss in the multiple jet impingements on the flat plate and pin-fin roughened plates. The numerical computation results showed that the pin-fins on the plates can have significant effects on the impingement heat transfer. Over the studied Reynolds number from 15,000 to 35,000, the overall averaged and local Nusselt number and the discharge coefficient in the multiple jet impingements on the flat and pin-fin plates were obtained and compared with each other. The overall heat transfer rate of the jet impingement on the inline pin-fin plate can be increased by up to 34.5% with a decrease discharge coefficient by about 3.0% compared with the jet impingement on the flat plate. The impingement on the inline pin-fin plate showed better heat transfer performance than that on the staggered pin-fin plate. Velocity distributions and streamlines, as well as turbulent kinetic energy near the test wall in the impingement system with the flat plate and pin-fin plates were also obtained to explain the heat transfer characteristics.

Numerical Evaluation of the Radiation Impedance for a Piston in a Nonrigid Baffle

Radiation Impedance for Square Piston Sources on Infinite Circular Cylindrical Baffles

Radiation Impedance Calculation for Arbitrarily Shaped Piston

A lumped-circuit model for the radiation impedance of a circular piston in a rigid baffle

On the radiation from unbaffled pistons and their dipole equivalent

Finite-Element Analysis of Aerostatic Lubrication with Porous Restrictors Based on Hypermesh

Numerical Simulation of the Performance of the Sc-89 Jet Impact System

A Simplified Algorithm for Impedance Calculation of Arbitrarily Shaped Radiators

On the spherical expansion for calculating the sound radiated by a baffled circular piston

Transient fluid reaction on a baffled plane piston of arbitrary shape

RADIATION DAMPING IN PLATES, INDUCED BY POROUS MEDIA

Analyzing acoustic radiation modes using fast multipole boundary element method

Numerical and experimental investigations on heat/mass transfer of slot-jet impingement in a rectangular cavity

Numerical spatial impulse response calculations for a circular piston radiating in a lossy medium

Analyzing Acoustic Radiation Modes of Baffled Plates with A Fast Multipole Boundary Element Method

Active Control of Radiation from a Piston Set in a Rigid Sphere.

Analysis of friction in surface textured components of reciprocating mechanism

Study on acoustic radiation impedance at aperture of a waveguide with circular cross section taking account of interaction between different guided modes

Numerical simulations of the piston effect for near-critical fluids in spherical cells under small thermal disturbance

Numerical predictions of jet impingement heat transfer on square pin-fin roughened plates

Numerical Investigation of Impingement Heat Transfer on A Flat and Square Pin-Fin Roughened Plates