Abstract:The wide concern on absolute pressure calibration of acoustic transducers at low frequencies prompts the development of the pistonphone method. At low frequencies, the acoustic properties of pistonphones are governed by the pressure leakage and the heat conduction effects. However, the traditional theory for these two effects applies a linear superposition of two independent correction models, which differs somewhat from their coupled effect at low frequencies. In this paper, acoustic properties of pistonphones at low frequencies in full consideration of the pressure leakage and heat conduction effects have been quantitatively studied, and the explicit expression for the generated sound pressure has been derived. With more practical significance, a coupled correction expression for these two effects of pistonphones has been derived. In allusion to two typical pistonphones, the NPL pistonphone and our developed infrasonic pistonphone, comparisons were done for the coupled correction expression and the traditional one, whose results reveal that the traditional one produces maximum insufficient errors of about 0.1dB above the lower limiting frequencies of two pistonphones, while at lower frequencies, excessive correction errors with an explicit limit of about 3dB are produced by the traditional expression. The coupled correction expression should be adopted in the absolute pressure calibration of acoustic transducers at low frequencies. Furthermore, it is found that the heat conduction effect takes a limiting deviation of about 3dB for the pressure amplitude and a small phase difference as frequency decreases, while the pressure leakage effect remarkably drives the pressure amplitude to attenuate and the phase difference tends to be 90° as the frequency decreases. The pressure leakage effect plays a more important role on the low frequency property of pistonphones.

On the radiation from unbaffled pistons and their dipole equivalent

A lumped-circuit model for the radiation impedance of a circular piston in a rigid baffle

Radiation Impedance for Square Piston Sources on Infinite Circular Cylindrical Baffles

Numerical Evaluation of the Radiation Impedance for a Piston in a Nonrigid Baffle

Radiation Impedance Calculation for Arbitrarily Shaped Piston

Sound field of a baffled piston source covered by a porous medium layer

Transient fluid reaction on a baffled plane piston of arbitrary shape

On the spherical expansion for calculating the sound radiated by a baffled circular piston

A Hybrid Lumped Parameters/Finite Element/Boundary Element Model to Predict the Vibroacoustic Characteristics of an Axial Piston Pump

Effective Impedance Boundary Optimization and Its Contribution to Dipole Radiation and Radiation Pattern Control

A Simplified Algorithm for Impedance Calculation of Arbitrarily Shaped Radiators

RADIATION DAMPING IN PLATES, INDUCED BY POROUS MEDIA

A homogenization method used to predict the performance of silencers containing parallel splitters

Acoustic Properties of Pistonphones at Low Frequencies in the Presence of Pressure Leakage and Heat Conduction

An approximate method to acoustic radiation problems :element radiation superposition method

Structural–acoustic Sensitivity Analysis of Radiated Sound Power Using a Finite Element/ Discontinuous Fast Multipole Boundary Element Scheme

Prediction Of Pcb Radiated Emission In Shielding Cavity Using Equivalent Dipole Modeling

Analyzing Acoustic Radiation Modes of Baffled Plates with A Fast Multipole Boundary Element Method

Analyzing acoustic radiation modes using fast multipole boundary element method

Active Control of Radiation from a Piston Set in a Rigid Sphere.

Converting a Monopole Emission into a Dipole Using a Subwavelength Structure