Abstract:The conceptual design and engineering of an integrated catalytic reactor requires a thorough understanding of the prevailing mechanisms and phenomena to ensure a safe operation while achieving desirable efficiency and product yields. The necessity and importance of these requirements are demonstrated in this investigation in the case of novel membrane-assisted reactors tailored for CO2 hydrogenation. Firstly, a carbon molecular sieve membrane was developed for simultaneous separation of CO2 from a hot post-combustion CO2-rich stream, followed by directing it along a packed-bed of hybrid CuO-ZnO/ZSM5 catalysts to react with hydrogen and produce DiMethyl Ether (DME). The generated water is removed from the catalytic bed by permeation through the membrane which enables reaction equilibrium shift towards more CO2-conversion. Extra process intensification was achieved using a membrane-assisted reactive distillation reactor, where similarly several such parallel membranes were erected inside a catalytic bed to form a reactive-distillation column. This provides the opportunity for a synchronized separation of CO2 and water by a membrane, mixing the educts (i.e., hydrogen and CO2) and controlling the reaction along the catalytic bed while distilling the products (i.e., methanol, water and DME) through the catalyst loaded column. The hybrid catalyst and carbon molecular sieve membrane were developed using the synthesis methods and proved experimentally to be among the most efficient compared to the state-of-the-art. In this context, selective permeation of the membrane and selective catalytic conversion of hybrid catalysts under the targeted operating temperature range of 200–260 °C and 10–20 bar pressure were studied. For the membrane, the obtained high flux of selective CO2-permeation was beyond the Robeson upper bound. Moreover, in the hybrid catalytic structure, a combined methanol and DME yield of 15% was secured. Detailed results of catalyst and membrane synthesis and characterization along with catalyst test and membrane permeation tests are reported in this paper. The performance of various configurations of integrated catalytic and separation systems was studied through an experimentally supported simulation along with the systematic analysis of the conceptual design and operation of such reactive distillation. Focusing on the subnano-/micro-meter scale, the performance of sequential reactions while considering the interaction of the involved catalytic materials on the overall performance of the hybrid catalyst structure was studied. On the same scale, the mechanism of separation through membrane pores was analyzed. Moreover, looking at the micro-/milli-meter scale in the vicinity of the catalyst and membrane, the impacts of equilibrium shift and the in-situ separation of CO2 and steam were analyzed, respectively. Finally, at the macro-scale separation of components, the impacts of established temperature, pressure and concentration profiles along the reactive distillation column were analyzed. The desired characteristics of the integrated membrane reactor at different scales could be identified in this manner.

Separation enhanced methanol and dimethyl ether synthesis

Solvent-Less Vapor-Phase Fabrication of Membranes for Sustainable Separation Processes

Process optimization of CO2membrane and cryogenic hybrid separation

Energy-efficient separation alternatives: metal-organic frameworks and membranes for hydrocarbon separation.

Sorption enhanced dimethyl ether synthesis under industrially relevant conditions: experimental validation of pressure swing regeneration

Research Progress on Seperation Process for One-step Synthesis of Dimethyl Ether from Syngas

Electrochemical Conversion of Methanol and Carbon Dioxide to Dimethyl Carbonate at Graphite-Pt Electrode System

Study on a New Reactive Dividing-Wall Column for the Reaction of Vinyl Carbonate and Methanol Ester Exchange to Produce Dimethyl Carbonate

Electrochemical Synthesis of Dimethyl Carbonate from Methanol, CO2 and Propylene Oxide in an Ionic Liquid

Carbon membranes for efficient water-ethanol separation

Co-Production of Dimethyl Carbonate, Dimethoxymethane and Dimethyl Ether from Methanol: Process Design and Exergy Analysis

Multiscale Analysis of Membrane-Assisted Integrated Reactors for CO2 Hydrogenation to Dimethyl Ether

Enhancing the Gas Separation Selectivity of Mixed-Matrix Membranes Using a Dual-Interfacial Engineering Approach

Large-scale preparation of composite membranes for CO2 separation via interfacial polymerization: Monomer selection and processing parameter optimization

Phase Equilibrium Calculation for Binary Systems with Dimethyl Ether and the Effects on Its Separation Process

Application of membrane separation technology in postcombustion carbon dioxide capture process

Membrane Separation Processes and Post-Combustion Carbon Capture: State of the Art and Prospects

Thermally self-sufficient process for single-step coproduction of methanol and dimethyl ether by CO 2 hydrogenation

Process design and downstream optimization of the direct synthesis route for cleaner production of dimethyl ether from biogas

Dehydration of Methanol to Dimethyl Ether—Current State and Perspectives

Does Direct Dimethyl Ether Synthesis from Carbon Dioxide and Hydrogen Yield More Valuable Products than the Equivalent Methanol Production? A Review on Recent Work