Abstract:It is difficult for traditional aluminum alloy manufacturing technology to meet the requirements of large-scale and high-precision complex shape structural parts. Wire Arc additive manufacturing technology (WAAM) is an innovative production method that presents the unique advantages of high material utilization, a large degree of design freedom, fast prototyping speed, and low cast. As a result, WAAM is suitable for near-net forming of large-scale complex industrial production and has a wide range of applications in aerospace, automobile manufacturing, and marine engineering fields. In order to serve as a reference for the further development of WAAM technology, this paper provides an overview of the current developments in WAAM both from the digital control system and processing parameters in summary of the recent research progress. This work firstly summarized the principle of simulation layering and path planning and discussed the influence of relative technological parameters, such as current, wire feeding speed, welding speed, shielding gas, and so on. It can be seen that both the welding current and wire feeding speed are directly proportional to the heat input while the travel speed is inversely proportional to the heat input. This process regulation is an important means to improve the quality of deposited parts. This paper then summarized various methods including heat input, alloy composition, and heat treatment. The results showed that in the process of WAAM, it is necessary to control the appropriate heat input to achieve minimum heat accumulation and improve the performance of the deposited parts. To obtain higher mechanical properties (tensile strength has been increased by 28%–45%), aluminum matrix composites by WAAM have proved to be an effective method. The corresponding proper heat treatment can also increase the tensile strength of WAAM Al alloy by 104.3%. In addition, mechanical properties are always assessed to evaluate the quality of deposited parts. The mechanical properties including the tensile strength, yield strength, and hardness of the deposited parts under different processing conditions have been summarized to provide a reference for the quality evaluation of the deposition. Examples of industrial products fabricated by WAAM are also introduced. Finally, the application status of WAAM aluminum alloy is summarized and the corresponding future research direction is prospected.

Wire Arc Additive Manufacturing of Al-Mg Alloy with the Addition of Scandium and Zirconium

Enhanced High-Temperature Strength and Ductility of Wire Arc Additive Manufactured Al-Ce-Mg Alloys with Fine Α-Al/al11ce3 Eutectics

The Microstructure and Properties of an Al-Mg-0.3Sc Alloy Deposited by Wire Arc Additive Manufacturing

Wire arc additive manufacturing of Al-Zn-Mg-Cu alloy: Microstructures and mechanical properties

Wire arc additive manufacturing of Al-Mg-Sc alloy: An analysis of the effect of Sc on microstructure and mechanical properties

Microstructure and mechanical properties of ultra-high strength Al-Zn-Mg-Cu-Sc aluminum alloy fabricated by wire + arc additive manufacturing

Development of a High Strength Magnesium Alloy for Wire Arc Additive Manufacturing

Wire arc additive manufacturing of a novel ATZM31 Mg alloy: Microstructure evolution and mechanical properties

Microstructure and mechanical properties of 600 MPa grade ultra-high strength aluminum alloy fabricated by wire-arc additive manufacturing

Wire and Arc Additive Manufacturing of High-Strength Al–Zn–Mg Aluminum Alloy

Development of a New High Strength Alloy from Low Alloy Steel Wire by Innovative Additional Cold Wire Feeding Used in Wire Arc Additive Manufacturing

Microstructures and Properties of Al-Mg Alloys Manufactured by WAAM-CMT

Wire arc additive manufacturing using high-strength steel tubular and solid wires

Minimizing porosity and optimizing microstructure of hot-wire arc additive manufactured Al-Cu-Mg-Ag alloy for strength increment

Microstructures and Mechanical Properties of Al–Zn–Mg Aluminium Alloy Samples Produced by Wire + Arc Additive Manufacturing

Wire Arc Additive Manufacturing (WAAM) of Aluminum Alloy AlMg5Mn with Energy-Reduced Gas Metal Arc Welding (GMAW)

Achieving high strength-ductility of Al-Zn-Mg-Cu alloys via hot-wire arc additive manufacturing enabled by strengthening precipitates

Printing High-Strength High-Elongation Al4043 Alloy Using UNS A94043 Welding Wires through Wire Arc Additive Manufacturing

Research Status and Development Trend of Wire Arc Additive Manufacturing Technology for Aluminum Alloys

Microstructure and Mechanical Properties of AlSi7Mg0.6 Aluminum Alloy Fabricated by Wire and Arc Additive Manufacturing Based on Cold Metal Transfer (WAAM-CMT)

Microstructure and Properties of Al-6.0Mg-0.3Sc Alloy Deposited by Double-Wire Arc Additive Manufacturing