Abstract:Over the last few decades, the demand for lightweight constructions has been increased continuously for several industrial applications, like automotive and ship building, to reduce the weight of vessels in order to minimize the CO2 emissions as a result of a lower fuel consumption. Lightweight construction is almost applied for ship applications, especially for yachts, which are designed by using aluminum for the deck constructions and steel for the ship hull. For joining these parts, a high-power laser welding process shall be developed. However, the welding of these dissimilar materials is associated with great challenges, due to the different physical properties and the formation of hard and brittle intermetallic phases, which may influence negatively the properties of the weld seam. The quality of dissimilar joints depends strongly on the mixture ratio between the molten amount of steel and aluminum. However, the mixture ratio varies over the weld seam length due to a high dynamic of the keyhole resulted by welding of this material combination. Furthermore, different batches of materials and varied sheet thicknesses t may influence the mixture ratio. In this study, a high-power laser welding process is developed with in-process control of the penetration depth tP by analyzing the spectral process emissions for dissimilar lap joints of aluminum alloy EN AW-6082 (t = 8 mm) and steel S355 (t = 5–7 mm). In the context of these investigations, an increase of occurring cracks within the weld seam and ejections of molten material with increasing penetration depth tP can be observed. To achieve a relative high joint strength, the penetration depth tP must be kept constant at a value of 1.4 mm. In case of varied batch of material, thickness t of the used sheets, welding speed vS, and leap of the steel sheet thickness t, the penetration depth tP requested cannot be achieved. Using the in-process control of the penetration depth tP, the weld seam quality remains almost constantly over the weld seam length, as shown in visual inspections, metallographic analyses, profiles of the penetration depth tP, and tensile shear testing. Among other things, the appearance of ejections of molten material can be avoided by using the in-process control of the penetration depth tP.

Penetration control in laser welding of sheet metal

Penetration feedback control in overlap laser welding of sheet metal

Study on Penetration Depth in Laser Welding: A Process Information Database-Based Control Strategy and OCT Measuring Verification

Evaluation Criterion and Closed-Loop Control of Penetration Status During Laser-Mig Hybrid Welding

Vision Sensing and Feedback Control of Weld Penetration in Helium Arc Welding Process

Investigations on in-process control of penetration depth for high-power laser welding of thick steel-aluminum joints

Numerical Simulation of Full Penetration Laser Welding of Thick Steel Plate with High Power High Brightness Laser

Vision System for Closed-Loop Control of the Penetration in Laser-Mig Hybrid Welding

Modeling of Conduction Mode Laser Welding Process For Feedback Control

Controlling the weld penetration depth of laser beam micro welding by using an iterative learning approachSteuerung der Einschweißtiefe beim Laserstrahl‐Mikroschweißen mit Hilfe eines iterativen Lernansatzes

Double Closed-Loop Control of the Focal Point Position in Laser Beam Welding

Sensing and Control System of Process Quality in Co2 Laser Deep Penetration Welding

Penetration Monitoring and Control of CO 2 Laser Welding with Coaxial Visual Sensing System

Penetration Control of GTAW Process for Aluminum Alloy Using Vision Sensing

Closed-Loop Control of Weld Penetration in Keyhole Plasma Arc Welding

In-process monitoring and feedback control during laser microspot lap welding of copper sheets

Adaptive Control for Laser Welding with Filler Wire of Marine High Strength Steel with Tight Butt Joints for Large Structures

Keyhole mapping to enable closed-loop weld penetration depth control for remote laser welding of aluminum components using optical coherence tomography

Controlling root penetration in electron beam welding by a through-current feedback

Predictive Control of Weld Penetration in Pulsed Gas Metal Arc Welding

Challenges in dynamic heat source modeling in high-power laser beam welding