Abstract:The initial unstable stage associated with keyhole plasma arc welding affects the stability and quality heavily, especially in the non-vertical welding position, which is difficult to control and restricts the process development and application. This work clarifies the temperature distribution and flow behavior of the process from the digging keyhole stage to the keyhole stable movement stage via an infrared thermography system and high-speed camera system. The experimental results showed that the molten metal on the rear side of the keyhole gradually accumulates and solidifies on the exit side and rear wall of the keyhole. When enough molten metal accumulates on the keyhole rear sidewall, it closes under the action of surface tension. The angle (86°–90°) of the keyhole rear sidewall formation can be used to determine whether the keyhole rear side is closed and reached the keyhole stable movement stage. Simultaneously, the influence of the shifting direction of gravity on the temperature distribution, flow behavior, and solidification morphology of the keyhole weld pool was investigated, which further revealed the initial unstable stage of the welding process. In the flat position, at this stage, the high-temperature area within the keyhole rear sidewall surface gradually accumulates close to the exit side of the weld pool. More molten metal flows to the keyhole exit side by gravity and shear forces, which causes a separation area on the keyhole rear side that is nearer to the exit side of the weld pool. This makes it harder to close the keyhole wall when it is in a flat position during the initial unstable stage. Furthermore, the temperature distribution and flow behavior of the keyhole rear side can be used as another factor to characterize the flow state of the weld pool in all positions and stages of welding.

Closed-Loop Control of Weld Penetration in Keyhole Plasma Arc Welding

Fundamental understanding of open keyhole effect in plasma arc welding

Evaluation Criterion and Closed-Loop Control of Penetration Status During Laser-Mig Hybrid Welding

Keyhole Detection by Arc Voltage Signal Processing During Plasma Welding

Sensing and Control System of Process Quality in Co2 Laser Deep Penetration Welding

Keyhole Welding with Hybrid Plasma-Free Arc Source

Vision System for Closed-Loop Control of the Penetration in Laser-Mig Hybrid Welding

Mechanism, Modeling, and Application of Plasma Current in Deep-Penetration Laser Welding

Penetration Monitoring and Control of CO 2 Laser Welding with Coaxial Visual Sensing System

Keyhole Thermal Behavior in GTAW Welding Process

Physical mechanism of material flow and temperature distribution in keyhole plasma arc welding at initial unstable stage

Double Closed-Loop Control of the Focal Point Position in Laser Beam Welding

Controlling The Plasma Of Deep Penetration Laser Welding To Increase Power Efficiency

Closed-loop Control of Medium-Thickness Plate Arc Welding Based on Weld-Face Vision Sensing

SOUND SENSING OF THE KEYHOLE BEHAVIORS IN PLASMA ARC WELDING

Vision Sensing and Feedback Control of Weld Penetration in Helium Arc Welding Process

Influence mechanism of the keyhole behavior on penetration depth by in-situ monitoring in pulsed laser welding of aluminum alloy

Interaction Mechanism of Arc, Keyhole, and Weld Pool in Keyhole Plasma Arc Welding: A Review

Controlling root penetration in electron beam welding by a through-current feedback

Numerical Analysis of Keyhole and Weld Pool Behaviors in Ultrasonic-Assisted Plasma Arc Welding Process

Modelling of Keyhole Dynamics and Porosity Formation Considering the Adaptive Keyhole Shape and Three-Phase Coupling During Deep-Penetration Laser Welding