Abstract:Over the last few decades, the demand for lightweight constructions has been increased continuously for several industrial applications, like automotive and ship building, to reduce the weight of vessels in order to minimize the CO2 emissions as a result of a lower fuel consumption. Lightweight construction is almost applied for ship applications, especially for yachts, which are designed by using aluminum for the deck constructions and steel for the ship hull. For joining these parts, a high-power laser welding process shall be developed. However, the welding of these dissimilar materials is associated with great challenges, due to the different physical properties and the formation of hard and brittle intermetallic phases, which may influence negatively the properties of the weld seam. The quality of dissimilar joints depends strongly on the mixture ratio between the molten amount of steel and aluminum. However, the mixture ratio varies over the weld seam length due to a high dynamic of the keyhole resulted by welding of this material combination. Furthermore, different batches of materials and varied sheet thicknesses t may influence the mixture ratio. In this study, a high-power laser welding process is developed with in-process control of the penetration depth tP by analyzing the spectral process emissions for dissimilar lap joints of aluminum alloy EN AW-6082 (t = 8 mm) and steel S355 (t = 5–7 mm). In the context of these investigations, an increase of occurring cracks within the weld seam and ejections of molten material with increasing penetration depth tP can be observed. To achieve a relative high joint strength, the penetration depth tP must be kept constant at a value of 1.4 mm. In case of varied batch of material, thickness t of the used sheets, welding speed vS, and leap of the steel sheet thickness t, the penetration depth tP requested cannot be achieved. Using the in-process control of the penetration depth tP, the weld seam quality remains almost constantly over the weld seam length, as shown in visual inspections, metallographic analyses, profiles of the penetration depth tP, and tensile shear testing. Among other things, the appearance of ejections of molten material can be avoided by using the in-process control of the penetration depth tP.

In-process monitoring and feedback control during laser microspot lap welding of copper sheets

Influence of process parameters in blue laser welding of copper and aluminum thin sheets

Quality improvement of copper welds by laser microwelding with the usage of spatial power modulation

ICONE19-43939 Phenomenological Evaluation of Laser-Irradiated Welding Processes with a Combined Use of Higher-Accuracy Experiments and Computational Science Methodologies : (5) Numerical Simulation of the Welding Processes with a Multi-Dimensional Multi-Physics Analysis Code SPLICE

Progress and Perspectives of In-Situ Optical Monitoring in Laser Beam Welding: Sensing, Characterization and Modeling

Review of laser welding monitoring

Quasi-Continuous Wave Pulsed Laser Welding of Copper Lap Joints Using Spatial Beam Oscillation

Development of Laser Welding Simulation Code with Advanced Numerical Models

Investigations on in-process control of penetration depth for high-power laser welding of thick steel-aluminum joints

Sensing and Control System of Process Quality in Co2 Laser Deep Penetration Welding

Evaluation Criterion and Closed-Loop Control of Penetration Status During Laser-Mig Hybrid Welding

Controlling the weld penetration depth of laser beam micro welding by using an iterative learning approachSteuerung der Einschweißtiefe beim Laserstrahl‐Mikroschweißen mit Hilfe eines iterativen Lernansatzes

High speed and high magnification in situ observation of residual liquid metal during laser welding process

Processing of Keyhole Depth Measurement Data during Laser Beam Micro Welding

Laser welding of laser-structured copper connectors for battery applications and power electronics

Optimization of processing parameters for pulsed laser welding of dissimilar metal interconnects

In-Process Monitoring of Lack of Fusion in Ultra-Thin Sheets Edge Welding Using Machine Vision

Penetration control in laser welding of sheet metal

Simulation Study on Weld Formation in Full Penetration Laser + MIG Hybrid Welding of Copper Alloy

Laser welding monitoring techniques based on optical diagnosis and artificial intelligence: a review

Effect of laser welding strategy for reducing intermetallic compound formation and residual stress