Abstract:In gas chromatography (GC), highly volatile liquefied hydrocarbons are commonly injected using devices such as high-pressure syringes, piston valves, liquid rotary sampling valves, or vaporizing regulators. Although these techniques are adequate in some cases, there are known deficiencies. A new generation of sampling valve has been recently innovated and commercialized. Some of the highlights of the pressurized liquid injection system (PLIS) include compact size, the capability to directly couple to an injection port without the need for preinjection vaporization and transfer lines, and sample sizes ranging from 0.2 to 2.0 micro L. Although the valve has a specification of helium leak-free rating of 82.7 bar (1200 psig), the valve passes a hydrostatic pressure test of up to 414 bar (6000 psig). In the unheated version of PLIS, vaporization of solutes occur mainly because of the sheering effect of carrier gas in combination with thermal energy drawn from an injection port or a heated adaptor. This was found to be adequate for solutes with high to medium volatility of up to nC14 hydrocarbon. A higher molecular weight range of up to nC44 hydrocarbon can be achieved with the implementation of a heated version of PLIS, in which the channel of the shaft can be resistively heated at a rate of up to 400 degrees C/s. With its first introduction in May 2002, PLIS has gained acceptance amongst practitioners in GC because it addresses a key unarticulated need in sample introduction/enrichment and by specifically targeting many deficiencies encountered in contemporary high-pressure injection devices. In this paper, the design and performance of the various valve systems of PLIS, as well as industrial chromatographic applications, is presented.

A Quantitative Gas Stream Splitting Injection System suitable for Use with Capillary Columns

Improving the reproducibility of quantitative gas-liquid chromatography by modifying the injection system

Repetitive liquid injection system for inverse gas chromatography

Capillary gas chromatographic injection system for large sample volumes

Construction and application of a cold on-column injection system for capillary gas chromatography

Innovations in High-Pressure Liquid Injection Technique for Gas Chromatography: Pressurized Liquid Injection System

Simultaneous three-dimensional gas-liquid chromatography on wall-coated glass-capillary columns

Dual-Column Stopped-Flow GC Method for Quantification of Permanent Gases, Water, and Organic Acids from a Single Injection

Sample introduction in high speed capillary gas chromatography; input band width and detection limits

Potential of the reversed-inject differential flow modulator for comprehensive two-dimensional gas chromatography in the quantitative profiling and fingerprinting of essential oils of different complexity

Micro gas chromatography sample injector for the analysis of natural gas

Quantitative analysis of 68 polar compounds from ten chemical classes by direct aqueous injection gas chromatography

Valveless gated injection for microfluidic chip-based liquid chromatography system with polymer monolithic column.

A Pressure-Driven Capillary Electrophoretic System with Injection Valve Sampling.

Quantitative Analysis Using Directly Coupled Supercritical Fluid Extraction-Capillary Gas Chromatography (SFE-GC) With a Conventional Split/Splitless Injection Port

Application of Capillary Introduction Mass Spectrometer to Direct Analysis of Liquid

FLow-injection analysis: a new approach to quantitative measurements in clinical chemistry.

Capillary fused-silica on-column injection of chlorinated pesticides with an ultra-low volume rotary valve

High-Throughput Capillary Liquid Chromatography Using a Droplet Injection and Application to Reaction Screening

Development of an automated high-temperature valveless injection system for online gas chromatography

Supplementary Material to &quot;development of an Online-Coupled MARGA Upgrade for the Two-Hourly Quantification of Low-Molecular Weight Organic Acids in the Gas and Particle-Phase&quot;