Abstract:The processing, particularly, etching of brittle, hard, and anti-corrosion materials represented by the third-generation wide bandgap semiconductor silicon carbide (SiC), is a significant challenge. Although SiC has excellent electrical, mechanical, and chemical properties, the difficulty of processing limits its application in various sensor devices. To solve this problem, in this study, an integrated processing method of femtosecond laser-assisted SiC dry etching is proposed, which realizes high surface quality and high rate etching of the SiC microstructure. Specifically, the effects of different laser processing parameters on the processing effect were first studied through orthogonal experiments. Experiments indicate that compared with laser power and laser scan times, laser processing speed has a more obvious impact on the processing effect. Subsequently, considering the elastic modulus anisotropy of SiC, a 5MPa piezoresistive pressure sensor chip was designed. Using the proposed composite processing method, a chip sensitive diaphragm was obtained. The diaphragm thickness and diameter are 76 μm and 1700 μm respectively. The overall sensor chip dimension was 4000 μm × 4000 μm × 350 μm. Static tests demonstrated that the sensor have excellent performance with sensitivity of 6.8 mV/MPa, linearity of 0.69% FS, and repeatability of 0.078% FS. In addition, by designing high-temperature packaging, the sensor achieved a pressure test at 400 °C. This study verifies the feasibility of the composite processing method, realizes the fabrication and measurement of high-temperature pressure sensors, and provides a reference for the micro-and nanostructure processing of various SiC sensors.

Silicon resonant microcantilevers for absolute pressure measurement

New silicon micromechanical resonant viscosity vacuum gage

Absolute Micro Pressure Measurements Based on a High-Overload-resistance Sensor

An Immersive Resonant Sensor with Microcantilever for Pressure Measurement

A Micromachined Resonant Micro-Pressure Sensor

A Novel Resonant Pressure Sensor with Boron Diffused Silicon Resonator

Realization of a Micro Pressure Sensor with High Sensitivity and Overload by Introducing Beams and Islands

A resonant high-pressure microsensor based on a composite pressure-sensitive mechanism of diaphragm bending and volume compression

A Micro-Pressure Sensor with High Sensitivity and Overload Resistance

Ultrasensitive Pressure Sensor Based on an Integrated Circular Piezoelectric MEMS Resonator and Diaphragm Structure

Research of a Novel Micromachined Resonant Pressure Sensor

Design and Fabrication of a Resonant Pressure Sensor by Combination of DETF Quartz Resonator and Silicon Diaphragm

A Micromachined Resonant Low-Pressure Sensor With High Quality Factor

A Novel Pressure Microsensor with 30- $\mu \Hbox{m}$-Thick Diaphragm and Meander-Shaped Piezoresistors Partially Distributed on High-Stress Bulk Silicon Region

Squeeze film absolute pressure sensors with sub-millipascal sensitivity

A Single-Side Micromachined MPa-Scale High-Temperature Pressure Sensor

Piezoresistive 4H-Sic Pressure Sensor with Diaphragm Realized by Femtosecond Laser

An Electrostatic Comb Excitation Resonant Pressure Sensor for High Pressure Applications

A Novel Piezoresistive Sensitive Structure for Micromachined High-Pressure Sensors.

Study on Micropressure Sensors of Cantilever Beam Circular Resonant Cavity

Fabrication of 4H-SiC piezoresistive pressure sensor for high temperature using an integrated femtosecond laser-assisted plasma etching method