Abstract:A porous and microstructure piezoresistive material composed of polydimethylsiloxane (PDMS) and multiwalled carbon nanotubes (MWCNTs) was designed and prepared for a flexible and highly sensitive pressure sensor over a wide detection range. The microstructure was patterned on the surface of the partially cured PDMS/MWCNTs/NaCl mixture by imprinting a nonwoven fabric. After curing and dissolving the NaCl powders, the porous and surface microstructure PDMS/MWCNT film was obtained. Two PDMS/MWCNT films were stacked together and sandwiched between two copper foil electrodes, in which the two microstructure surfaces were in contact with the electrodes. Due to the synergistic effects of the combination of the porous structure and surface microstructure, the flexible sensor had highly sensitive response over a wide pressure range from 1 Pa to 100 kPa. Under the small pressure, the high sensitivity was achieved by the change in contact areas between the electrodes and the surface microstructures; at high pressure up to 100 kPa, the sensor retained its high sensitivity because of the porous structure of the piezoresistive PDMS/MWCNT material. Additionally, the sensor had fast response speed and good durability. The piezoresistive pressure sensors based on the porous and microstructure PDMS/MWCNTs were demonstrated in detection of sound, monitoring of human activities, and array mapping of the spatial pressure distribution.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c22938?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c22938</a>.Pore size distribution and porosity of the PDMS/MWCNT film; SEM images of the nonwoven fabric and the PDMS/MWCNTs with porosity; chemical characterization of the PDMS/MWCNT film; strain–stress curves of PDMS/MWCNT films prepared under different conditions; setup for sensor testing; ΔR/R0 (%) versus applied pressure for the PDMS/MWCNT films prepared under different conditions; IV curves of the sensor based on the PDMS/MWCNT films under different pressures (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c22938/suppl_file/am0c22938_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Ultrasensitive Pressure Sensor Based on an Integrated Circular Piezoelectric MEMS Resonator and Diaphragm Structure

A Soft Piezoresistive Pressure Sensor Based on Porous Conductive CB/PDMS Composite

MXene@CTAB@CMF Three-Dimensional Elastic Base for Piezoresistive Pressure Sensors Realized by Electrostatic Self-Assembly

Prefabrication design, theoretical framework and simulation demonstration of a meander-shaped MEMS piezoresistive pressure sensor implanted on silicon substrate circular diaphragm for enhancement of key performance parameters utilized for low-pressure applications

Engineered Microstructure Derived Hierarchical Deformation of Flexible Pressure Sensor Induces a Supersensitive Piezoresistive Property in Broad Pressure Range

A high pressure sensor with circular diaphragm based on MEMS technology

Enhancing Sensitivity of Piezoresistive Pressure Sensor at Low Pressures Using Photo‐Sensitive Resin Plate as Flexible Substrate

High Sensitive and Linear Pressure Sensor for Ultra-low Pressure Measurement

A High-sensitivity, Small-size Resonant Pressure Microsensor Based on Optimized Resonator-diaphragm Structure.

A piezoresistive pressure sensor with centralized piezoresistors and a diamond-shape composite diaphragm

Polysilicon thin film piezoresistive pressure microsensor: design, fabrication and characterization

A resonant high-pressure microsensor based on a composite pressure-sensitive mechanism of diaphragm bending and volume compression

Flexible piezoresistive sensor constructing from ILs/MWCNTs/PVDF ternary composite for high sensitivity and wide detection range

A Novel Pressure Microsensor with 30- $\mu \Hbox{m}$-Thick Diaphragm and Meander-Shaped Piezoresistors Partially Distributed on High-Stress Bulk Silicon Region

Synergy of Porous Structure and Microstructure in Piezoresistive Material for High-Performance and Flexible Pressure Sensors

An Optimized Integrated Optical Coupled Micro Ring Resonator for Low Pressure Sensing

Design and fabrication of a tiny micro-pressure sensor with improved linearity and sensitivity

Two-dimensional van der Waals heterostructure for ultra-sensitive nanoelectromechanical piezoresistive pressure sensing

A high sensitive graphene piezoresistive MEMS pressure sensor by integration of rod beams in silicon diaphragm for low pressure measurement application

Highly Sensitive, Flexible MEMS Based Pressure Sensor with Photoresist Insulation Layer.

High-performance Flexible Piezoresistive Pressure Sensor Based on Multi-layer Interlocking Microstructures