Abstract:Adequate designed ventilation systems can be an alternative technique to create better thermal conditions in buildings. Unlike cross ventilation, single-sided ventilation mode which is highly applicable in high-rise residential buildings has been not taken into account extensively in previous studies to determine its influence on indoor thermal conditions. The current study aims to fulfill the gap by evaluation of this type of ventilation mode in the tropical climate. Building orientation and height as two crucial factors that may impact the ventilation mode were concerned in a field experiment to achieve reliable outcomes. The field experiment was carried out in a seventeen story residential building in Kuala Lumpur to analyze the influence of single-sided ventilation mode on indoor air temperature, relative humidity and air velocity according to the sun path analysis. This found that a living room located on a higher floor facing the prevailing wind achieves approximately 90% thermal acceptability at a mean air velocity of 0.52ms−1. Further analysis between the best and worst scenarios revealed that indoor air temperature and relative humidity were influenced by orientation and height, with the air velocity in the living room in the best scenario being almost eight times higher than same room in the worst scenario. Multiple comparisons of rooms by post hoc tests showed significantly different mean air temperatures and air velocities in most of the cases, and hence confirmed the effects of orientation and height on these variables. However, the study explored that internal space division can counteract the role of orientation in such cases. Thus, along with building orientation, interior layout should be taken into account in the analysis of indoor thermal conditions in future studies. Finally, the study recommended further studies on the direct influence of air velocity on air temperature in single-sided ventilated unit due to some drawbacks in existing studies.

Field measurement and numerical investigation of natural cross-ventilation in high-rise buildings; Thermal comfort analysis

Natural cross-ventilation in buildings: Building-scale experiments, numerical simulation and thermal comfort evaluation

Simulation Study on the Effectiveness of Passive Natural-Ventilated Facade Devices for High-Rise Public Buildings

Natural ventilation in high-rise office building – Comfort and energy performance

The Effects of Orientation and Width of Space Between Buildings on Ventilation of High-Rise Areas

Numerical and experimental investigations of the impacts of window parameters on indoor natural ventilation in a residential building

The influence of single-sided ventilation towards the indoor thermal performance of high-rise residential building: A field study

Sustainable ventilation strategies in buildings: CFD research

Analyzing the effects of passive design strategies on building ventilation performance and thermal comfort using simulation-based approach

Thermal performance and comfort potential estimation in low-rise high thermal mass naturally ventilated office buildings in India: An experimental study

Experimental investigation of buoyancy-driven natural ventilation in a building with an atrium using particle image velocimetry (PIV) method

CFD modeling of natural ventilation in a void connected to the living units of multi-storey housing for thermal comfort

Balcony design and surrounding constructions effects on natural ventilation performance and thermal comfort using CFD simulation: a case study

Investigating thermal comfort and occupants position impacts on building sustainability using CFD and BIM

Building Design Utilizing Natural Ventilation Based on CFD and Ventilation Network Analysis and Its Performance Evaluation by Field Measurement

Windows design for maximum cross-ventilation in buildings

Exploring the effect of building form and arrangement on outdoor thermal comfort in residential complexes (case study: Tabriz city)

Numerical investigations of buoyancy-driven natural ventilation in a simple atrium building and its effect on the thermal comfort conditions

Toward improving thermal behavior of passive solar structures by natural ventilation and extraction – case study –

Achieving wind comfort through window design in residential buildings in cold climates, a case study in Tabriz city

Evaluation of passive cooling through natural ventilation strategies in historic residential buildings using CFD simulations