Abstract:Air renewal rate is an important parameter for both indoor air quality and thermal comfort. However, to improve indoor thermal comfort, the air renewal rate to be used, in general, will depend on the outdoor air temperature values. This article presents the modelling of indoor air quality and thermal comfort for occupants of a passive building subject to a climate with warm conditions. The ventilation and shading strategies implemented for the interior spaces are then considered, as well as the use of an underground space for storing cooled air. The indoor air quality is evaluated using the carbon dioxide concentration, and thermal comfort is evaluated using the Predicted Mean Vote index. The geometry of the passive building, with complex topology, is generated using a numerical model. The simulation is performed by Building Thermal Response software, considering the building's geometry and materials, ventilation, and occupancy, among others. The building studied is a circular auditorium. The auditorium is divided into four semi-circular auditoriums and a central circular space, with vertical glazed windows and horizontal shading devices on its entire outer surface. Typical summer conditions existing in a Mediterranean-type environment were considered. In this work, two cases were simulated: in Case 1, the occupation is verified in the central space and the four semi-circular auditoriums and all spaces are considered as one; in Case 2, the occupation is verified only in each semi-circular auditorium and each one works independently. For both cases, three strategies were applied: A, without shading and geothermal devices; B, with a geothermal device and without a shading device; and C, with both shading and geothermal devices. The airflow rate contributes to improving indoor air quality throughout the day and thermal comfort for occupants, especially in the morning. The geothermal and shading devices improve the thermal comfort level, mainly in the afternoon.

Evaluation of passive cooling through natural ventilation strategies in historic residential buildings using CFD simulations

The impact of natural ventilation on the adaptive reuse of a Taiwanese heritage house: an analysis using anemometers and CFD

Sustainable ventilation strategies in buildings: CFD research

Natural cross-ventilation in buildings: Building-scale experiments, numerical simulation and thermal comfort evaluation

Toward improving thermal behavior of passive solar structures by natural ventilation and extraction – case study –

Predicting Thermal and Energy Performance of Mixed-Mode Ventilation Using an Integrated Simulation Approach

Natural ventilation in high-rise office building – Comfort and energy performance

Natural ventilation as a passive cooling strategy for multi-story buildings: analytic vertical skycourt formations

Analyzing the effects of passive design strategies on building ventilation performance and thermal comfort using simulation-based approach

Impact of climate change on the potential of free-cooling strategies for a retrofitted building in a hot climate

Multi-factor optimization of energy performance in naturally ventilated building: a case study of office building in hot summer and cold winter climate

Computational modeling of natural ventilation in low-rise non-rectangular floor-plan buildings

Simulation Study on the Effectiveness of Passive Natural-Ventilated Facade Devices for High-Rise Public Buildings

Simulating Natural Ventilation in Early Stage Design: Combining an Occupant Behavior Model with an Airflow Network Approach

Optimizing Natural Ventilation Design in A Large Factory Building Using Simulation

Field measurement and numerical investigation of natural cross-ventilation in high-rise buildings; Thermal comfort analysis

Windows design for maximum cross-ventilation in buildings

Natural ventilation cooling effectiveness classification for building design addressing climate characteristics

Simulation of wind-driven ventilative cooling systems for an apartment building in Beijing and Shanghai

Modelling of Indoor Air Quality and Thermal Comfort in Passive Buildings Subjected to External Warm Climate Conditions

Experimental and CFD study of ventilation performance enhanced by roof window and mechanical ventilation system with different design strategies