Abstract:Natural ventilation is one of the most important passive strategies for optimizing building energy saving and environmental performance. However, it is difficult for natural ventilation design to realize the utmost utilization of ambient energy based on the conventional design process due to the design performance of natural ventilation is significantly influenced by the schematic plan of a building. Therefore, this study introduces a design process using a concise model of Thermal Autonomy as an evaluation metric for the early design stage. To apply the proposed metric to modern office buildings, which are equipped with effective HVAC systems, a practical and common thermal comfort criterion of 21°C–27°C is adopted to replace the adaptive comfort standard in the original Thermal Autonomy quantification. The availability of the proposed metric for rapid diagnosis is evaluated through parametric simulation based on a typical office building in Shanghai. The evaluation result and the visual map of Thermal Autonomy are verified to determine the proper air change rate and to help architects to understand the design performance of their natural ventilation scheme. In the case study, the proper air change rate is estimated at 8 ac/h corresponding to a comfort hour of 1314 h. This comfort hour value accounts for the maximum value of 50% during the occupied hour. In addition, the effect of Thermal Autonomy in decision-making regarding envelope insulation and initial operation conditions is examined. It is beneficial to maintain the indoor thermal environment by setting the lower outdoor temperature limit for opening windows at 17°C under a higher feasible ventilation volume. A relatively high envelope insulation level with 50 mm or 75 mm insulation layer is advantageous for improving Thermal Autonomy under a larger ventilation volume condition. The method proposed in this study is practical for objectively evaluating the design performance of natural ventilation during the early design stage.

Building Design Utilizing Natural Ventilation Based on CFD and Ventilation Network Analysis and Its Performance Evaluation by Field Measurement

FIELD MEASUREMENT OF NATURAL VENTILATION SYSTEM DESIGNED IN HOSPITAL BUILDING WITH VOID(Environmental Engineering)

Using the central ventilation shaft design within public buildings for natural aeration enhancement

SIMULATING NATURALLY VENTILATED BUILDINGS WITH DETAILED CFD- BASED WIND PRESSURE DATABASE

Simulation Of Building Environment In A Residential District

Design optimization and field demonstration of natural ventilation for high-rise residential buildings

Evaluating wind-driven natural ventilation potential for early building design

Optimizing Natural Ventilation Design in A Large Factory Building Using Simulation

Simulating Natural Ventilation in Early Stage Design: Combining an Occupant Behavior Model with an Airflow Network Approach

Validation of CFD Simulations for Natural Ventilation

Simulation Study on the Effectiveness of Passive Natural-Ventilated Facade Devices for High-Rise Public Buildings

Optimization Analysis of Natural Ventilation in University Laboratories Based on CFD Simulation

Sustainable ventilation strategies in buildings: CFD research

Predicting Thermal and Energy Performance of Mixed-Mode Ventilation Using an Integrated Simulation Approach

CFD simulations of wind-induced ventilation in apartment buildings with vertical voids: Effects of pilotis and wind fin on ventilation performance

Experimental and CFD study of ventilation performance enhanced by roof window and mechanical ventilation system with different design strategies

A framework for rapid diagnosis of natural ventilation effect during early design stage using Thermal Autonomy

Coupled simulation of natural ventilation and daylighting for a residential community design

Natural ventilation cooling effectiveness classification for building design addressing climate characteristics

Construction, validation and testing of a water table for natural ventilation analysis