Abstract:In the present study use of solar-assisted buoyancy-driven natural ventilation in a simple atrium building is explored numerically with particular emphasis on the thermal comfort conditions in the building. Initially various geometric configurations of the atrium space were considered in order to investigate airflows and temperature distributions in the building using a validated computational fluid dynamics (CFD) model. The Reynolds Averaged Navier–Stokes (RANS) modelling approach with the SST-k–ω turbulence model and the Discrete Transfer Radiation Model (DTRM) was used for the investigations. The steady-state governing equations were solved using a commercial CFD solver FLUENT©. From the numerical results obtained, it was noted that an atrium space integrated with a solar chimney would be a relatively better option to be used in an atrium building. In the geometry selected, the performance of the building in response to various changes in design parameters was investigated. The produced airflows and temperature distributions were then used to evaluate indoor thermal comfort conditions in terms of the thermal comfort indices, i.e. the well-known predicted mean vote (PMV) index, its modifications especially for natural ventilation, predicted percent dissatisfied (PPD) index and Percent dissatisfied (PD) factor due to draft. It was found that the thermal conditions in the occupied areas of the building developed as a result of the use of solar-assisted buoyancy-driven ventilation for the particular values of the design parameters selected are mostly in the comfortable zone. Finally, it is demonstrated that the proposed methodology leads to reliable thermal comfort predictions, while the effect of various design variables on the performance of the building is easily recognized.

Experimental investigation of buoyancy-driven natural ventilation in a building with an atrium using particle image velocimetry (PIV) method

Wind tunnel experiment of ventilation rate and airflow characteristics in natural ventilation induced by wind and buoyancy effects

Numerical investigations of buoyancy-driven natural ventilation in a simple atrium building and its effect on the thermal comfort conditions

Field measurement and numerical investigation of natural cross-ventilation in high-rise buildings; Thermal comfort analysis

Natural cross-ventilation in buildings: Building-scale experiments, numerical simulation and thermal comfort evaluation

Buoyancy-driven single-sided natural ventilation in buildings with large openings

Experimental study of building natural ventilation with pendulum velocity anemometer

Investigating the Temperature Distribution of Non-Enclosed Atriums with Air Infiltration in Winter

Wind-driven natural ventilation in a low-rise building: A Boundary Layer Wind Tunnel study

Thermal performance of atria: An overview of natural ventilation effective designs

Construction, validation and testing of a water table for natural ventilation analysis

Natural ventilation in high-rise office building – Comfort and energy performance

Full-scale validation of CFD simulations of buoyancy-driven ventilation in a three-story office building

Using the central ventilation shaft design within public buildings for natural aeration enhancement

Validation of CFD Simulations for Natural Ventilation

Reduced-scale experimental and numerical investigation on the energy and smoke control performance of natural ventilation systems in a high-rise atrium

Impact of opening shape on airflow and pollutant dispersion in a wind-driven cross-ventilated model building: Large eddy simulation

Buoyancy-driven natural ventilation performance of a multi-story building with vertical shaft designed by using dimensionless design approach

Simulation Study on the Effectiveness of Passive Natural-Ventilated Facade Devices for High-Rise Public Buildings

Simulating Natural Ventilation in Early Stage Design: Combining an Occupant Behavior Model with an Airflow Network Approach

Toward improving thermal behavior of passive solar structures by natural ventilation and extraction – case study –