Abstract:The paper considers the determining factors in the structural strength of heat-strengthened glass. The values of residual stress were obtained experimentally at different points on the surface of specimens of heat-strengthened, HS-glass and fully tempered, FT-glass using a SCALP-4 laser scanning polarimeter. The distribution of residual stresses is determined over the area of specimens. It is found that the standard methods of in-process control of the degree of strengthening that involve the determination of compressive stresses only at several points, give a fairly rough estimate of the average level of induced residual stresses in glass structural elements and do not determine their real significance near the fracture origins. The necessity of using the methods of more comprehensive in-process control of residual stresses is justified in order to obtain data on their statistical distribution and optimize the heat strengthening modes according to special requirements to building glazing and new engineering products. As shown by the analysis of the investigations dealing with determination of “the strengthening effect” during heat treatment of glass, it does not exceed the level of residual stresses. Due to the statistical nature of glass strength and residual stresses, the determination of the empirical coefficient, which traditionally considers the increasing contribution of residual stresses to the strength value of heat-strengthened glass, presents great difficulties. Based on the sampling of the bending strength values for glass in the initial, as-received state and after heat strengthening using the mathematical statistics methods, the calculated distribution of stress values that characterize the strengthening effect is determined. The influence of the combination of heat strengthening and etching on the strength characteristics of glass is investigated. It is found that the enhancement of the strength of glass and glass products strengthened using combined techniques is accompanied by a significant increase in the scatter of the tensile strength values, and the influence of the combined treatment on the tensile strength of glass is not additive.

Stress State of a Glass Coating In Pipes

Discussion of Allowable Stress of Glass-lined Equipment

Numerical Simulation of Glass Bottle Forming Process

Physically-based Interpretation of Abnormal Stress Relaxation Response in Glassy Polymers

The Change of Glass Transition Temperature under General Stress State in Amorphous Materials

COMPUTATIONAL AND EXPERIMENTAL STUDY OF THE STRESS-STRAIN STATE OF A PIPE UNDER EXTERNAL RADIAL LOAD, INTERNAL PRESSURE AND TEMPERATURE DIFFERENCE

Structural Strength of Heat-Strengthened Glass

Numerical analysis of the stress-strain state of a polymer reinforced pipeline

Steam strengthened glass

THE INFLUENCE OF PIPE STRESS STATE ON THE PITTING CORROSION RATE OF OILFIELD PIPELINES

Influence of proportional multiaxial fatigue loading on the residual mechanical properties of glass-reinforced plastic pipes

Assessment of Residual Stress Evolution in Glass-to-metal Seals Amid Heating Process: Insights from in Situ Observations and Finite-Element Analysis

A Study of the Effect of Fiber Content and Fiber Orientation on the Tensile Strength of Glass Fiber Reinforced Epoxy Composite for Pipe Production: A Taguchi and Statistical Approach

In Situ Characterization of Residual Stress in Glass-to-metal Seal

COMBINED EXTRUSION OF GLASSES WITH A CONICAL BOTTOM. KINEMATIC AND STRESS STATES OF THE PLASTIC REGION IN CONTACT WITH THE CONICAL SURFACE OF THE MATRIX

Glass Coating Deposition Temperature on the Inner Surface of Heat-Exchange Tube

Comparison of methods of residual-stress measurement

Optimized Sealing Process And Real-Time Monitoring Of Glass-To-Metal Seal Structures

Mechanical Properties of Glass Fibre Reinforced Pipeline During the Laying Process

Structural relaxation of porous glasses due to internal stresses and deformation under tensile loading at constant pressure

Slow relaxation dynamics in binary glasses during stress-controlled, tension-compression cyclic loading