Abstract:The etch profile control for the amorphous carbon layer (ACL) is an important step in the 3D NAND fabrication process. Because ACL is the mask material for defining the pattern of the high-aspect-ratio-contact (HARC) dielectric ONON layer etch process, precise control of its etch profile is necessary. Specifically, an ideal ACL mask profile should be free of symptoms such as hole circularity distortion, profile twisting, bowing, and undercutting. In order to achieve this desired etch performance, knowledge of various etch contributing factors must be systematically derived and applied, including etch surface chemistry, high-aspect-ratio (HAR) etchant transport, ion flux and ion energy angle distribution function (EADF) control, etc. In this work, we investigate the ACL etch fundamental characteristics through combined 2D chamber-scale plasma simulations with the hybrid plasma-equipment model (HPEM) and 3D etch profile simulations with the Monte-Carlo Feature Profile Model (MCFPM) for an inductively-coupled-plasma (ICP) reactor with RF bias at the substrate. In particular, we focus on the profile trends under different reactant fluxes and energies. Our findings indicate that maintaining a neutral-starved (ion-rich) etch regime is essential for mitigating both the channel hole etch circularity distortion and the slit etch profile twisting. To achieve this desired etch regime, the HAR ion, and neutral transport must controlled by the RF bias power and frequency, substrate temperature, etc. Furthermore, especially in this neutral-limited etch regime which is necessary for distortion and twisting mitigation, the control of the consequent aspect-ratio dependent etching (ARDE), as well as maintaining the critical dimension (CD) and reducing bowing and undercutting are also necessary. For this purpose, atomistic density functional theory (DFT) calculations have been applied to compare the reaction energetics for various ALD-like sidewall passivation chemistries. Specifically, we propose a new process based on its favorable reaction energetics. Experimental cross-section images have matched simulation results. In conclusion, our insights have provided guidance for process optimization and tool design to meet industrial demands.

The investigation of DARC etch back in DRAM capacitor oxide mask opening

Investigation of Amorphous Silicon As Dry Etch Hard Mask in BEOL Low-k Dielectric Patterning

Oxidizer Engineering of ALD for Efficient Production of ZrO2 Capacitors in DRAM

Mechanisms for plasma etching of RRAM SiO2 with diblock copolymer selectivity

CMOS-Compatible Low-T Processing Methods for HZO-based DRAM Capacitors by E-field Cycling

High Aspect Ratio Carbon Hard Mask Etch Process for Profile and LCDU Control

High-aspect-ratio amorphous carbon mask etch profile control through plasma and surface chemistry optimization

The Optimization of Spacer Engineering for Capacitor-Less DRAM Based on the Dual-Gate Tunneling Transistor

Wafer level microarcing model in 90nm chemical-vapor deposition low-k via etch on 300mm silicon-on-insulator substrate

Challenges for plasma etch integration of ferroelectric capacitors in FeRAM's and DRAM's

Rapid prototyping of etch test structures for hard mask development using electron beam lithography

A New Embedded Measurement Structure for eDRAM Capacitor

Investigation of SiO2 Etch Characteristics by C6F6/Ar/O2 Plasmas Generated Using Inductively Coupled Plasma and Capacitively Coupled Plasma

Double-sided Row Hammer Effect in Sub-20 Nm DRAM: Physical Mechanism, Key Features and Mitigation

Step Coverage and Dry Etching Process Improvement of Amorphous Carbon Hard Mask

Development of Air-Gap Etching Process by a Mask Approach for Characterization of Intralayer and Interlayer Capacitances

5.1 Å EOT and low leakage TiN/Al2O3/Hf0.5Zr0.5O2/Al2O3/TiN heterostructure for DRAM capacitor

Interface Optimization and Performance Enhancement of Er2O3-Based MOS Devices by ALD-Derived Al2O3 Passivation Layers and Annealing Treatment

Study of Metal–Dielectric Interface for Improving Electrical Properties and Reliability of DRAM Capacitor

Study of Plug Etch back process matching on faraday shielded ICP and traditional CCP plasma ETCH chambers

Effect of Etch Conditions on Expanding Surface Corrosion of Anodic Foil for Aluminum Electrolytic Capacitors