Abstract:The hydrodynamic characteristics, mass transfer, and mixing performance of three different reactors, a bubble column reactor (BCR), a single-stage internal-loop airlift reactor (SSALR), and a four-stage internal-loop airlift reactor (FSALR), were investigated systematically through cold model experiments to explore the influence of draft tube configurations on the pilot-scale internal-loop airlift reactor (ILAR). The findings indicated that the BCR yielded a higher gas holdup and mass transfer coefficient due to its longer bubble residence time. Segmenting the draft tube improved the gas holdup in both the riser and downcomer, and the overall gas holdup in the downcomer increased by 9%. Compared with the SSALR, the mass transfer coefficient of the FSALR in the riser and downcomer increased by 10.2% and 9.3% on average, respectively. In addition, a higher liquid circulating velocity was obtained with the ILARs due to a higher gas holdup difference between the riser and the downcomer. Specifically, the liquid circulating velocity of the FSALR was 134.1% higher than that of the BCR and 15.8% higher than that of the SSALR. The mixing time of the ILARs was reduced due to more intense overall circulation. The mixing effect of the FSALR was the best. The mixing time was reduced by 70.2% and 51.3% compared with the BCR and SSALR for UG ranging from 4.0 cm/s to 9.1 cm/s, respectively. Empirical correlations were proposed for the gas holdup, liquid circulating velocity, mass transfer coefficient, and mixing time on the superficial gas velocity, and agreement with experimental data was satisfactory.

CIRCULATION OF GAS AND LIQUID PHASES IN EXTERNAL-LOOP AIRLIFT REACTORS

Gas Holdup and Liquid Velocity Distribution in a Jet Loop Reactor

CFD Simulation for Up Flow Jet-Loop Reactors by Use of Bi-Dispersed Bubble Model

Gas Holdup and Liquid Velocity Distributions in the Up Flow Jet-Loop Reactor

Experimental Investigation on Multiscale Hydrodynamics in a Novel Gas–liquid–solid Three Phase Jet‐loop Reactor

Experimental and Numerical Simulation on Sequential Three Phase Jet-Loop Reactor

Hydrodynamic and mass transfer characteristics of external-loop airlift reactors without an extension tube above the downcomer

EFFECTS OF AERATED LIQUID LEVEL ABOVE DOWNCOMER ON HYDRODYNAMIC CHARACTERISTICS OF AN EXTERNAL-LOOP AIRLIFT REACTOR

Gas Holdup and Liquid Circulation Velocity in Gas-Liquid Two Stage Internal Loop Airlift Reactor

Liquid Circulation Hydrodynamics in an External Loop Airlift Reactor

Liquid Circulation in A Multi-Tube Air-Lift Loop Reactor

Hydrodynamics and Mass Transfer Characteristics in an Internal Loop Airlift Reactor with Different Spargers

Liquid Circulation Velocity and Local Gas Holdup in Air-lift Loop Reactor

Hydrodynamics and Bubble Behaviour in a Three-Phase Two-Stage Internal Loop Airlift Reactor

Flow behavior in the three-phase internal-loop airlift reactor with large gas recirculation through the downcomer

Hydrodynamic Behavior in Three-Phase External Loop Airlift Reactors

The Influence of Draft Tubes on the Mass Transfer and Mixing Performance of a Pilot-Scale Internal-Loop Airlift Reactor

Hydrodynamic Character of Internal-Loop Airlift Reactor

Influences of Structure and Operational Parameters on Gas Hold-Up in an External-Loop Reactor

Influence of Sparger Type on Mass Transfer in a Pilot-Scale Internal Loop Airlift Reactor

Gas–Liquid Flow Characteristics and Performance Optimization of Industrial Downflow Jet Loop Reactor Based on Computational Fluid Dynamics