Abstract:Proton exchange membrane fuel cells (PEMFCs) are considered as the mostpromising alternative power sources with a wide variety of applications owing to their attractive advantages compared to other conventional power sources. During the past decades, the cell performance has been gradually improved. However, the cell performance improvement and cost reduction are still urgently needed due to the requirements of commercialization of PEMFCs.A three-dimensional mathematical model for low temperature proton exchangemembrane fuel cells (LT-PEMFCs) has been developed. The fluid flow, heat andmass transfer inside fuel cells are governed by the mass, momentum, species and energy conservation equations. The transport processes of electrons and protons are determined by the charge conservation equations, and the Butler-Volmer equation and agglomerate model are applied to describe the hydrogen oxidation reaction (HOR) and oxygen reduction reaction (ORR) at the anode and cathode catalyst layers (CLs), respectively. In addition, the liquid water formation and transport in porous regions, and water transport through the membrane are taken into account in the mathematical model. For the agglomerate model, the size and structure of the agglomerates are determined by the agglomerate radius (ragg), the volume fraction of ionomer within the agglomerate (Li,agg), and the thickness of the ionomer film over the agglomerate (δi). The effects of agglomerate model parameters on transport characteristics and cell performance are investigated using the developed model. To avoid the reactant gas leakage and minimize the contact resistance, the assembly force is applied on the fuel cell stack, and accordingly the gas diffusion layer (GDL) deformation arises. Fuel cells with interdigitated flow fields under different assembly forces are systematically studied.A three-dimensional mathematical model for high temperature proton exchangemembrane fuel cells (HT-PEMFCs) has also been developed. The fluid flow, heatand mass transfer, and electron and proton transport inside fuel cells are governed by the mass, momentum, species, energy and charge conservation equations. The transport phenomena and performance of fuel cells with different flow fields have been analyzed and compared using the developed model. In addition, the fuel cell with metal foams as flow distributor has also been investigated and compared to the fuel cell with conventional straight channel flow field.Cooling plates of fuel cells aims to avoid overheating, reduce the maximumtemperature and minimize the temperature variations inside fuel cells. A three dimensional model has been adopted to investigate the cooling plates with non-uniform and wavy flow channel designs. The fluid flow and thermal characteristics of various designs have been examined and compared in detail. (Less)

Modelling of Humidity Dynamics for Open-Cathode Proton Exchange Membrane Fuel Cell

Modelling and Simulation of A Portable Fuel Cell System

Fuel Cell Humidity Modeling and Control Using Cathode Internal Water Content

Numerical Analysis of Static and Dynamic Heat Transfer Behaviors Inside Proton Exchange Membrane Fuel Cell

Modeling Water and Thermal Transients Inside Proton Exchange Membrane for Vehicle Application Fuel Cells

Investigation of Water and Heat Transfer Mechanism in PEMFCs Based on a Two-Phase Non-Isothermal Model

A single-phase, non-isothermal model for PEM fuel cells

A Control-Oriented Model for Predicting Variations in Membrane Water Content of an Open-Cathode Proton Exchange Membrane Fuel Cell

Investigating the Effects of Multi-Dimensional Parameters on the Internal Hydrothermal Characteristics of Proton Exchange Membrane Fuel Cells Via an Enhanced Impedance Dimensional Model

Numerical and Experimental Investigation of the Asymmetric Humidification and Dynamic Temperature in Proton Exchange Membrane Fuel Cell

Simulation of Water Transport in Proton Exchange Membrane Fuel Cell Using a One-dimension Model

Analysis of Water Management in Proton Exchange Membrane Fuel Cells

Analyze the Effects of Flow Mode and Humidity on PEMFC Performance by Equivalent Membrane Conductivity

A Lumped-Mass Model of Membrane Humidifier for PEMFC

Control-oriented Modeling and Exploration of Hygrothermal Characteristics of Air-Cooled Proton Exchange Membrane Fuel Cell

Modeling and analysis of water vapor dynamics in high-temperature proton exchange membrane fuel cell coupling gas-crossover phenomena

A Multi-Field Coupled PEMFC Model with Force-Temperature-Humidity and Experimental Validation for High Electrochemical Performance Design

The Optimization of PEM Fuel Cell Performance Using the CFD Method Combined with Experimental Validation

Modeling and Simulations of Multiphysics Phenomena Ad Performance in Proton Exchange Membrane Fuel Cells

Effects of Operating Conditions on Water and Heat Management by a Transient Multi-Dimensional PEMFC System Model

Modeling and Experimental Investigation of the Anode Inlet Relative Humidity Effect on a PEM Fuel Cell