Abstract:Modern civilization and cutting-edge technologies and tools are highly dependent on energy storage devices and demand efficient and long-lasting high-energy-density storage devices. Lithium metal batteries have surpassed their competitors concerning energy density due to their inherent high specific capacity (3860 mAh/g) and the lowest electrochemical potential (-3.04 V vs. standard hydrogen electrode), proving to be one of the most favorable energy storage devices for smart and mobile gadgets, electric automobiles, grid storage, etc. However, safety-threatening and performance-decay challenges associated with lithium metal anodes, such as lithium dendrite formation, uncontrolled parasitic reactions between Li-metal and electrolyte, low coulombic efficiency, dead Li-formation, etc., restrict its employment in practical batteries. The root cause of the dendrite formation is poor Li-ion conductivity of bulk lithium metal, which results in an uneven electric field distribution, leading to non-uniform Li deposition/stripping upon repeated charge/discharge. Herein, a facile chemical reduction process is being opted to fabricate a highly Li-ion diffusive Li-Sn-based artificial SEI layer on the lithium metal surface to prevail over the above-mentioned issues. Therefore, upon careful concentration investigation of reactants, 25 mM precursor concentration (SnCl 4 in EC: DMC in 1:1 volume ration) demonstrated the best electrochemical performance, revealing a cumulative capacity of over 700 mAh/cm 2 at a current density of 1 mA/cm 2 for 1 h in a symmetric cell. Physical characterizations (XRD and SEM-EDS) showed a thin layer containing Li-Sn alloys along with LiCl formed at the lithium metal surface. Possessing high Li-ion diffusivity, Li-Sn alloyed hybrid anode illustrated a gradual decrease in the charge transfer resistance on increasing the concentration, thus, lower overpotential in symmetric cells, in contrast to pristine Li-metal. However, an increase in the electrical resistance has been observed on increasing the precursor concentration due to the presence of the insulating LiCl phase in the protective layer. Moreover, in-situ optical microscopy demonstrated more uniform and on-surface Li-deposition for the hybrid electrode, whereas mossy and dendritic growth on bare Li-metal. Full cells prepared with Li-Sn alloyed anode against NMC532 cathode illustrated stable cycling up to 150 cycles; contrastingly, the cell with pristine Li-metal showed a drastic capacity fade just after 100 cycles, demonstrating the inclination towards safer lithium metal batteries.

Thickness dependence of high volumetric energy density lithium ion battery based on Sn–Zn eutectic alloy foil anode

Enhanced lithium storage performance in three-dimensional porous SnO 2 -Fe 2 O 3 composite anode films

Defect character distribution regulation of alloy foil anode for high volumetric energy density lithium ion battery

Circumventing chemo-mechanical failure of Sn foil battery anode by grain refinement and elaborate porosity design

LOCAL ORDER AND DYNAMICS IN LIQUID ELECTROLYTES : SMALL ANGLE NEUTRON SCATTERING

Interface Engineering and Structure Design of Alloying Type Metal Foil Anode for Lithium Ion Batteries: A Review

Electrodeposited Lithiophilic Zn Thin Film on the Current Collector for Improved Cyclability of Anode-Free Lithium Metal Battery

Alloying and Nano Technology for Sn‐Based Anode Materials: Paving the Way to the Future of Lithium‐Ion Batteries

Li-Sn Alloyed Layer Containing Artificial SEI on Li-Metal Anode for Superior Lithium Metal Batteries: Development and Understanding of Anode/Electrolyte Interfacial Phenomena

Surpassing lithium metal rechargeable batteries with self-supporting Li–Sn–Sb foil anode

Thickness controllable Li-Zn composite anode for high energy and low N/P ratio lithium metal batteries

Novel high-performance anodic materials for lithium ion batteries: two-dimensional Sn-X (X = C, Si, and Ge) alloy monolayers

Advancing Anode-Less Lithium Metal Batteries: ZnF2 Modification and In-Situ Structural Regulation for Enhanced Performance

Fast Ion Transport in Li‐Rich Alloy Anode for High‐Energy‐Density All Solid‐State Lithium Metal Batteries

Improved Plating/Stripping in Anode-Free Lithium Metal Batteries through Electrodeposition of Lithiophilic Zinc Thin Films

SnBi Alloy Composites Via Controlling Cooling Rate for High Performance Lithium-Ion Battery Anode

Synergetic Enhancement of the Electronic/ionic Conductivity of a Li-ion Battery by Fabrication of a Carbon-Coated Nanoporous SnOxSb Alloy Anode

Dynamic Concentration of Alloying Element on Anode Surface Enabling Cycle‐Stable Li Metal Batteries

Grain boundary density matters in lithiation performances of aluminum foil anode for lithium ion batteries

Sub‐Thick Electrodes with Enhanced Transport Kinetics via In Situ Epitaxial Heterogeneous Interfaces for High Areal‐Capacity Lithium Ion Batteries

High Ionic Conductive, Mechanical Robust Sulfide Solid Electrolyte Films and Interface Design for All‐Solid‐State Lithium Metal Batteries