Abstract:Hot working, as an important group of post-processing routes for additive manufacturing technology (3D printing), is used to reduce the solidification/processing defects and anisotropy of properties, grain refinement, improvement of mechanical properties, processing of pre-formed parts, and increasing the applicability domain. Accordingly, the present state of the art of the elevated temperature deformation behavior and constitutive description of flow stress during thermomechanical processing of additively manufactured parts is summarized in this monograph. Besides the effects of temperature and strain rate (represented by the Zener-Hollomon parameter), the significance of initial phases and the type of additive manufacturing process on the hot deformed microstructure, restoration processes of dynamic recovery (DRV) and dynamic recrystallization (DRX), flow stress, workability, and hot deformation activation energy is critically discussed. In this regard, the α'-martensite in Ti-6Al-4V titanium alloy produced by selective laser melting (SLM), the precipitates in aluminum alloys (such as 2219 Al alloy) produced by wire and arc additive manufacturing (WAAM), and the Laves phase in Inconel 718 superalloy produced by laser metal deposition (LMD) are remarkable examples. The utilization of innovative methods with in situ hot working effects such as additive friction stir deposition (AFSD) is also enlightened. Regarding the constitutive equations for modeling and prediction of hot flow stress, the reports on the strain-compensated Arrhenius model, artificial neural network (ANN) approach, DRX/DRV kinetics models, Johnson-Cook equation, and Fields-Backofen formula are presented, and the potentials of the modified, simplified, and physically-based approaches are discussed. Finally, the future prospects in this research field such as the hybridization of additive manufacturing with hot forming processes, work-hardening analysis for obtaining the onset of DRX, unraveling the effects of as-built microstructure, developing processing maps, proposing some physical-based unified constitutive models, and investigation of novel and/or widely-used alloys such as austenitic stainless steels, high-entropy alloys, and aluminum alloys (e.g. AlSi10Mg alloy) are proposed.

Incremental Formulation for the Prediction of Flow Stress and Microstructural Change in Hot Forming

A Method for Prediction of Forming Strain for Cold Stamping Formed Head Made of S30408 Austenitic Stainless Steel

Formulation, identification and validation of a stochastic internal variables model describing the evolution of metallic materials microstructure during hot forming

Research on incremental forming simulation based on an improved constitutive model

A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations

Relevant material characterization for load prediction in incremental forming

An extended mesoscaled M-K model for predicting discrete ultimate strains and evaluating the effect of normal stress on forming limits

A constitutive model on flow stress prediction from the contribution of twin and grain refinement, strain and strain rate during surface mechanical attrition treatment of metals

Size dependence of flow stress and plastic behaviour in microforming of polycrystalline metallic materials

Two new mathematical models to predict the flow stress at hot deformation

Non-Associated Flow Rule Constitutive Modeling Considering Anisotropic Hardening for the Forming Analysis of Orthotropic Sheet Metal

A non-associated anisotropic plasticity model with mixed isotropic–kinematic hardening for finite element simulation of incremental sheet metal forming process

Numerical prediction of ductile fracture in multi-stage single point incremental forming based on phenomenological modified Mohr–Coulomb

Microstructure-Based Flow Stress Model to Predict Machinability of Inconel 718

A Physical-Based Plane Stress Constitutive Model for High Strength AA7075 under Hot Forming Conditions

Additive manufacturing – A review of hot deformation behavior and constitutive modeling of flow stress

Application of the Finite Element Method to the Incremental Forming of Polymer Sheets: The Thermomechanical Coupled Model and Experimental Validations

Numerical Modelling for Efficient Analysis of Large Size Multi-Stage Incremental Sheet Forming

Advanced Models for the Prediction of Forming Limit Curves

A Novel Algorithm for Thickness Prediction in Incremental Sheet Metal Forming

A Comparative Study of Deterministic and Stochastic Models of Microstructure Evolution during Multi-Step Hot Deformation of Steels